Why does solid wood furniture crack and other phenomena

At present, most of the low-end solid wood furniture on the market almost all have wood cracking problems, and the main reasons are several points:

1. The wood is not dried well before production; Wood moisture or heat will produce deformation, wood will crack, furniture before production moisture content is kept below 10, solid wood furniture wood cracking can be avoided.

2. Improper selection of materials during production, scarring, pomegranate or wood deformation on the material, home furniture will be deformed due to the natural distortion of wood during use, and the production will be cracked.

3. No paint; Furniture is easy to absorb water without paint, the parts of furniture that absorb more water expand greatly, and other parts expand small, and the wood is twisted and deformed and cracked.

4. There is a large difference in humidity between the place of production and the place of use; If the humidity in the factory or the place where the furniture is used is high, the furniture will deform due to moisture and cause cracking.

The following are the reasons for the cracking of solid wood wardrobes and the secret recipe for solid wood wardrobe maintenance, I hope the answers provided by Xiudada can help you.

1. Improper use.

Wooden furniture is exposed to the sun or lacks maintenance for a long time, or is often moved, and is subjected to external action, cracking will occur.

2. Production process.

Due to improper control of the drying process, it will cause internal cracks and form hidden defects, which will gradually be revealed during use.

3. The wood itself.

If the wood is put for too long or not long enough, it will lead to the change of the moisture content of the wood itself, the dryness of the material itself is not enough, and after paving, when encountering environmental changes, the furniture will remain in the wood under the action of stress, and the wood itself will crack.

Solid wood wardrobe maintenance secrets.

1. Always keep the cabinet door clean, and there can be no debris and dust in the track. When cleaning, you can wipe the cabinet body and cabinet door with a semi-wet rag, and do not use corrosive cleaning agents. The dust of the track can be cleaned with a vacuum cleaner or a small brush, and the metal parts such as cabinet racks and pull rods can be wiped with a dry cloth.

2. Heavy objects and sharp objects should be prevented from smashing the track, scratching the cabinet and door panel, and the edge of the cabinet should not touch water and other liquid solvents to prevent the edge from falling off.

3. Let it breathe, or use dehumidifier regularly, so as to avoid moisture and bacteria in the cabinet and clothes. Use less chemical fragrances to remove odors from your wardrobe, as they are likely to cause damage to your wardrobe.

4. When the air or weather in the room is too humid, please open the doors and windows regularly for ventilation and place small packets of dry lime or other desiccant in the corner of the wardrobe to prevent mold and deformation of the cabinet and door panel.

5. The wooden wardrobe can be wiped with a clean rag, if it is dirty, you can use soapy water or neutral detergent to wipe with a damp cloth.

If there is a problem with the quality, don't quibble, well, of course your own fart feels fragrant.

When it comes to cracking, don't say it's a quality problem!

Popularize it to everyone: any wood furniture wood contains water, it is active wood, when the air humidity is too low, wood furniture will shrink, too high will expand, it is the natural properties of wood that make it crack! If the drying effect is pursued excessively, the wood will lose its properties and make it carbonized, and there will be no Ming and Qing Dynasty old furniture for hundreds of years!

No pumping, no cracking, no ring, that is panel furniture, autumn and winter wood furniture these characteristics are more obvious, not a quality problem.

Changes in external temperature and humidity, man-made injuries, etc., will cause cracking.

Every type of wood has an optimal moisture content, less than the optimal moisture content, the wood will crack, and more than the optimal moisture content will mold. Since a lot of the furniture is not in the country of origin, the environment in which good wood is produced is relatively humid. The home does not guarantee an environment with the optimal moisture content of the wood.

will crack. And the optimal moisture content of each type of wood is different. Nowadays, many furniture can not avoid cracking by pumping oil, which is a natural phenomenon, and no one can go against nature.

Prevention or maintenance can only make the environment close to the optimal moisture content of furniture wood, and you can add a humidifier to your home. Look up the book and look at the material of your furniture.

Solid wood furniture is not easy to crack to maintain a certain moisture, and it is easy to crack in a particularly dry environment. Tip: Buy a humidifier.

Cracking of solid wood furniture is actually a process problem related to what climate and environment are related to its excuse Now factories are pursuing the maximization of benefits at the same time, the process requirements are relatively high The moisture content of the board is well controlled and can meet the national standards, but since they are in line with the standards, why crack The problem appears on the workers Everyone knows that solid wood furniture must leave shrinkage joints Cracking of solid wood furniture is mostly due to this problem In the process of gluing workers in pursuit of speed glue is a brush Didn't clean it with a fine brush, so that the shrinkage joints of the wood are actually only the shape of the no god did not play a role in the cause of the weather changes throughout the country the air moisture content also changes the natural shrinkage joints are glued to the normal shrinkage will be pulled up But now the glue is better not easy to fault The tension is a big crack In fact, you pay attention to it and know that the cracking is not the cracking at the junction of the two pieces of wood are the bursts of other places Only their own views on the cracking of solid wood furniture If there is something wrong, please correct the masters.

The cracking of solid wood furniture is due to the problem of the board, mainly when it is processed in the factory, and it is not dried well! (The moisture exceeds the standard, and then it will naturally crack as soon as it dries) There is also a connection that is not done well, and it will crack Solid wood furniture is mainly afraid of moisture!! Pay attention to this point on the line If you don't usually pay attention to touch the paint This is easy to solve Find a furniture repair OK Le

The cracking of solid wood furniture is because of the problem of the board, and solid wood furniture is mainly afraid of moisture.