Which component of plastic reacts chemically with paint on solid wood furniture?

Plasticizers and antioxidants in plastics are somewhat corrosive to paints. But the water mist blistering you mentioned is mainly caused by too much moisture under the plastic sheet.

Paint materials contain various solvents benzene, xylene, nitro paint thinner ethanol, butanol, etc. are also toxic, volatilized solvent vapor during construction, high concentration of human nerves have serious irritation and harm. At low concentrations, headaches, nausea, fatigue, and abdominal pain may also occur. Long-term exposure can cause loss of appetite, damage to the hematopoietic system, and chronic poisoning

For solid wood furniture, the public should pay attention to the cleaning and maintenance of the surface of the furniture. Regularly use a pure cotton dry and soft cloth to gently wipe off the surface dust, and every once in a while, use the wet cotton silk that wrung out the moisture to clean the dust in the corners of the furniture, and then wipe it with a clean dry soft cotton cloth.

Solid wood furniture needs to be wiped down regularly.

For solid wood furniture, the public should pay attention to the cleaning and maintenance of the surface of the furniture. Regularly use a pure cotton dry and soft cloth to gently wipe off the surface dust, and every once in a while, use the wet cotton silk that wrung out the moisture to clean the dust in the corners of the furniture, and then wipe it with a clean dry soft cotton cloth.

If there are stains on the surface of the furniture, do not rub it vigorously, you can gently remove the stain with warm tea, wait until the water evaporates and apply a little light wax to the original part, and then gently rub it several times to form a protective film.

When cleaning, do not let the cleaning tools touch the furniture, and pay attention not to let hard metal products or other sharp objects collide with the furniture, so that there are no traces of bruises on the surface.

At the same time, it should be avoided as much as possible to avoid long-term exposure of outdoor sunlight to the whole or part of the furniture, so it is best to place it in a place that can avoid the sun. In this way, it does not affect the indoor lighting, but also protects the indoor furniture.

How to make solid wood furniture glow.

The placement of wooden furniture should be avoided from direct sunlight, and the furniture should not be close to the furniture when using the heater or fireplace in winter to prevent the furniture from fading and cracking.

Keep the room ventilated and dry, and do not let the wooden furniture always be in a humid environment to avoid mildew of the furniture. If the climate is particularly dry, wipe the surface with a slightly damp flannel cloth to prevent warping.

Do not touch wooden furniture with rough and sharp objects or liquids such as strong acids and alkalis.

The dirt on the surface of wooden furniture should be wiped off frequently and in a timely manner.

After the wooden furniture is painted, it can be evenly coated with a layer of floor wax on the painted and dried wooden furniture, and then wiped with a clean soft cloth to keep the patent leather shiny for a long time. In addition, the surface of wooden furniture is often wiped with rice washing water, which can maintain the luster of its lacquer surface for a long time.

This is the fault of the plastic tablecloth, the plastic tablecloth and the paint layer of the tabletop are in close contact, coupled with the heat conduction of pots and pans, causing the plastic and the paint to react, and part of the plastic melts on the tabletop, which is the reason for sticking.

You can use alcohol to scrub the desktop thoroughly, which can basically be removed, and the gasoline effect is better, but it will hurt the desktop paint.