Kitchen sewer hose backflow problem

Updated on Kitchen 2024-03-04
5 answers
  1. Anonymous users2024-01-23

    What to say about this question.

    Generally speaking, it is a matter of sealing, which has nothing to do with pressure.

    And most of this kind of sealing is also caused by quality problems, now except for some high-grade sewers, the quality of the sealing rings used in other sewers is very poor, it is difficult to achieve sealing.

    I don't recommend using sealant on the inspection port for the following reasons.

    The sealant can be sealed as a whole, but the adhesive of this sealant is particularly strong, and it is common for the general household to block some things in the sewer, and it will not be repaired after using the sealant.

    I recommend that you go to the construction market and find a special gasket so that you can replace it again.

  2. Anonymous users2024-01-22

    Hello: The water is not copied may be sealed with a seal, because of the attack for the following bai

    The mouth is to prevent plugging and repairing, any kind of sewer pipe will leave the position of dao, the cause of water leakage can not be the problem of pressure, the problem will only come out of the pipe connection, it is recommended that you find a good plumber to help you reconnect the sewer pipe, it is likely that the rubber ring position at the interface is not placed, the general leakage will not be related to pressure, it will only be the problem at the joint, and often hit the glass glue when connecting these joints, that thing is generally not used, As long as the rubber gasket is pressed right, the raw tape is tied firmly, and it will generally not leak, as for the pressure you said, I will repeat it, it is definitely okay!

    Hope it helps!

  3. Anonymous users2024-01-21

    The surface of the hose is circled, which cannot be completely sealed, but it can be solved by connecting a straight section of pipe.

  4. Anonymous users2024-01-20

    This may be that the sewer pipe you copied is not smooth in the first place, or you are on the first floor, if it is the first floor, it may appear in such a situation. You don't need to replace it with a sealed one, you put a plastic bag on the mouth of the hose, that is, replace the seal with plastic, my family is like this, the effect is good, you can try it.

  5. Anonymous users2024-01-19

    The sewer pipe is too thin and the sewer is not smooth.

Related questions
Kitchen sewer problems!
2 answers2024-03-04

The previous pipe must have been blocked by the underground pipe, and after this, it may be that there is a blockage between the third floor and your fourth floor, in fact, if it has been blocked before, the second time the pipe was changed, it was due to the change of a larger pipe

Fix the problem of kitchen sewer pipes
3 answers2024-03-04

It is recommended that you do not change the pipes in the home casually, some residents in order to change the pipes of the original building for a while, resulting in too many pipe elbows in the home, the horizontal pipe is too long, and it is easy to cause blockage after a long time.

The distance between the sink hose and the kitchen drain pipe is long, how to solve it
2 answers2024-03-04

Add a section of sewer pipe to the hose length.

The kitchen drain hose is not plugged into the sewer pipe, and who is responsible
2 answers2024-03-04

This water is for your use, and of course you are responsible for the leakage, because it has been so long, and the water has leaked downstairs and you haven't noticed it, so you can't get into the kitchen upstairs for a long time.

Please tell me how to solve the problem of kitchen sink drainage and backwater, thank you
2 answers2024-03-04

Kitchen sink drain blockage solution: Usually, the sink blockage is mostly due to the accumulation of debris at the U-shaped bend of the drain pipe, resulting in poor drainage. >>>More