-
Anonymous users2024-01-23Seriously, a good solid wood brush paint was ruined.
The friend above said that it is already very professional, it is not very good to do, you need to take the door down, if you don't have a gun, you can use the glue ba, and then flatten the solid wood veneer for two people, buy a scraper, put a thick paper, use an electric iron to gently iron from the bottom or top, and then scrape hard with a scraper to stick it, which is also the basic principle of the hot melt Boeing film of the paint-free door.
-
Anonymous users2024-01-22Solid wood veneer door can be re-stained with 502 glue, which is fast and waterproof.
502 glue is used for porous and absorbent materials, and is used for steel, non-ferrous metals, rubber, leather, plastics, ceramics, wood, non-ferrous metals, non-metallic ceramics, glass and flexible materials such as rubber products, leather shoes, soft and hard plastics, etc. It is widely used in electrical appliances, instruments, machinery, electronics, optical instruments, medical, light industry and civil industries.
-
Anonymous users2024-01-21If you can't do it yourself, you have to buy paint-free boards or decorative boards, apply glue on the back and then hit them with air nails. You don't have an air pump, you don't have an air nail gun, you can't do it.
-
Anonymous users2024-01-20With 204 glue!
The veneer door is a three-plywood, a very thin one, and the outside is painted with paint, which can be regarded as baking paint, which is the outermost layer of the woodworking board; The veneer door is the bark pasted on the outside, and the paint is baked, this kind of door is more expensive, depending on what kind of veneer is, of course; The composite door is pasted with high-density board on the outside, and it is painted in the examination
Solid wood door veneer, generally using fir laminated timber (including fragrant fir, spruce, imported hemlock), that is, finger-jointed wood, the inner core is generally divided into keel structure (not fully solid), and finger-jointed fang solid core two, on both sides pressed on the MDF, and then pasted with bark, hot pressing. The natural wood content is up to 95%. >>>More
The processing time of lacquered solid wood composite door veneer is generally about 30 days. >>>More
If it is a bedroom, it is best to use a solid wood door, an all-solid wood door. What you said is not good, the log is the best but expensive, so you had better use the door of all solid wood, the door of solid wood paint, you can log in to the people's life network to ask customer service, let the customer service tell you the phone number of the factory, you ask clearly, the best.
The landlord has some confusion about the concept of solid wood (logs) and solid wood composites. As long as it is not a solid wood (log) wood product, where solid wood composite (note"Compounding"Two words) of wood products, all of which should be veneered. Solid wood or solid wood composite is lacquered, so look at it this way, of course, solid wood (logs) are good lacquered. >>>More