-
The kitchen water valve should also be hit to the hot water side before the hot water can flow out.
-
Is the pipe too long and not insulated, and is the pipe getting smaller and blocked?
The water pipe is too thin or has a local bottleneck
The main reason for this situation is that the pressure of the tap water is too small, and the shower side is both in the lower head and the shower head in comparison, and the water pressure cannot make the gas water heater. >>>More
The temperature of the heat exchange surface of the water heater is very high, and there will be scale when the water flows over, and after a long time, there will be a lot of scale attached to the surface of the heat exchanger, which will accumulate over time, causing the hot water pipeline to be blocked, which will cause the hot water output to become smaller (the phenomenon of small water pressure), the hot water output time will become longer, and it is not good to ignite and other problems. >>>More
There is an X3 in the Beverly X series, which has the function of kitchen washing++. One-key switch kitchen washing mode, you can choose 38 degrees fruit and vegetable washing, and 45 degrees high temperature degreasing washing. Very smart, which is also an exclusive feature of the X3.
Gas water heaters are water-controlled and have a minimum water flow requirement, which is not met, and the water heater cannot release gas and turn on the ignition and cannot be used. >>>More