Solid wood table and chair paint

Spray painting is OK, but it should be sanded with sandpaper first, so that not only can the dirt be cleaned, but the surface of the table and chair is smoother, and the joint will be firmer when it is painted again, and the primer does not need to be removed, it will be covered by the re-painted paint (this does not include clear water paint), the paint can be chosen by yourself, generally with rose red, lemon yellow tones. However, when choosing the color, you must pay attention to the repainted paint, which should be higher or the same depth than the primary paint, so as to cover the original color. When buying paint, buy a brush by the way, add a bottle of thinner, used to dilute the paint, these people in the store will tell you, no need to talk more, no matter what paint needs to dry time, it's just the length of time, now the paint is mostly industrial paint, drying is very fast, and the paint can be used immediately after not being applied.

Solid wood tables and chairs are generally polyester paint, worn, adjusted, filled with putty or putty, if the primer is to be removed, it must be cleaned with paint stripper, but that is too troublesome, the cost of removal is also high, the primer on the top does not hinder anything, polishing is flat.

It is best to apply a new paint to the same type of paint as the original paint, or to apply a primer with nitro paint (the thickness of the paint determines the drying time, generally 10 minutes to dry, hard to dry 60 minutes).

After the primer is dry, sand, spray or brush the nitro topcoat (the topcoat does not need to be too thick, 1-2 microns is sufficient) The drying time is also fast, and there are fewer harmful gases in the paint.

1. It is best to polish the original paint thoroughly.

2. Polishing the original smooth surface roughly, and then scraping the putty.

3. Re-paint after the surface treatment is clean and smooth.

Reference: Sanwa lacquer.

The paint is worn and falls, [[putty, leveling, and then spray a layer of paint, don't get the primer off, the new paint should dry quickly, and if it comes with a nozzle, the spraying must be thin and cover it]].

If you can't get it yourself, ask the oiler to get it for you, they're professional.