-
Anonymous users2024-01-23A typical bath bomb has five threads.
The zero line is directly connected to the zero line of the bath bomb, and the live wire jumps to each switch, and is sent to the lighting, heating, and ventilation joints through each switch, and one is the ground wire.
-
Anonymous users2024-01-22There are four wires, usually divided into lighting, ventilation, heating, and a neutral wire.
-
Anonymous users2024-01-21This is determined by the number of controls on the field wiring and the controlled end.
For example: the power supply enters the switch bottom box, and the bath bomb has four controlled quantities: warm air, cold air, ventilation, and lighting, and 5 wires need to be worn from the bath bomb installation.
Bath bombs usually wear 5 wires, and 4 live wires through switches control 2 sets of heating bulbs respectively. >>>More
One is the fire line into the house, the other is the control line of the bath bomb, 1 is 2 lights, 1 is 2 lights, one is lighting, one is a fan, a total of 4 together five, you can reserve, now the bath bomb has sent wires, you leave two, the other installers will be installed, the bath bombs are 220V, no matter how many bath bombs are used, there are instructions to connect the two lines above. >>>More
PVC pipe, 16MM is OK. There is no need to install a junction box, just make an elbow that is level with the wall.
The blue is the neutral line, the red is the live line, and the other colors are the control line.
This may be different from what is written on each brand of wind pestle, some are one switch, some are two switches, if it is a warm wind 1, there is a warm 11, I think it should be a warm wind 11 windy, try it to know.