-
Anonymous users2024-01-23Consider how large the niche will be in harmony with the wall in your bathroom. Generally speaking, the most practical place is next to the left or right side of your wash basin, but this place is not designed to be too large in size, and it is practical but not aesthetically pleasing. My bathroom is long, so I designed a longer alcove opposite the wash basin.
FURTHERMORE, THE ACTUAL SIZE OF THE SLOTTING MUST BE 5-10CM LARGER THAN THE DESIGN SIZE, SO AS NOT TO HINDER THE WORK OF THE BRICKLAYER.
This is more important, the specific size of the niche should refer to the tile you choose, and the actual size should be an integer multiple of the tile size and there should be no zero difference. In other words, if you use 30*30CM tiles, then the niche size should be 30*60 or 60*120CM and so on 30CM multiples, at this time the design of any non-30CM multiple size niche, such as 48*69CM, means that the tiles have to be cut to paste, so that the final effect is not good-looking.
Don't ignore this issue, because it takes several people from design to construction. You can't guarantee that every group of people will be in line and there will be no problems. If you don't have something to do in the end, you have to rework or settle for it, which will increase the cost of renovation or you will have to face this failure every day for years to come.
It is very important to find a good master to work, and the alcoves that meet on all sides have the overall effect.
Step to read. 4. The niche inlaid with tiles in the bathroom, the four frames should be designed at a 45-degree angle as much as possible, and the edge should not be sealed with a sunny corner decorative strip to show the most beautiful effect of the niche. The only drawback is that the collision resistance becomes worse when the corners are thinned.
It is best to hang the towels used for washing every day in a ventilated place, stuffy in a damp bathroom niche, which is easy to breed mold.
Installation Method: 1. Lay floor tiles and wall tiles first, and pay attention to whether there are errors on the top and bottom of the wall; >>>More
Use a spray-type glass cleaner to spray a large X-shape on the glass, and then wipe it in one direction with a wrung out rag, if you find that there is still a watermark on the glass, you can use newspaper to crumple it and wipe it back and forth to remove the dullness.
1.Selection of water pipe materials.
Before installing water pipes, be sure to buy high-quality, environmentally friendly water pipes. If the PP-R pipe is installed, it is better to ask a professional worker to install it. If you install it yourself, there is a high risk that the pipe will be clogged or burst, which will cause unnecessary trouble. >>>More