-
Anonymous users2024-01-23Step 1: Find the drain of the toilet bowl and hold the leather puff tightly with both hands.
Step 2: Align the round opening of the leather bowl and press it against the drain of the toilet.
Step 3: Press firmly on the handle of the leather pistol with both hands so that the whole wood sinks into the hole in the middle of the pin until there is no room to fall.
Step 4: Release the force of your hands to return the circle of the leather puff to its original shape, and repeat the process all the time.
Three, four. Step 5: In about 1 minute, the clogged toilet can be unblocked.
-
Anonymous users2024-01-22Toilet process:
Suck that toilet bowl and don't rush to pull it out;
Then fill the toilet bowl with water to ensure that the water pluck is completely sealed with the toilet bowl to have strength.
Fill with water and plug it in repeatedly.
-
Anonymous users2024-01-21This one doesn't work very well, so you can try the plucker with a pump. Of course, it is best to use a special spring wire (the kind with a turning handle) that runs through the toilet.
-
Anonymous users2024-01-20Put it down the drain and press it down, then lift it up, and repeat it, and the principle is the same as a syringe
-
Anonymous users2024-01-19Fill the toilet pipe with water first, then aim the pipe mouth with a puffer and push it up and down several times.
1. Hold the handle of the leather plucker tightly, and pay attention to the distance between the rubber and the toilet drain. >>>More
Hold the handle, cover the bottom of the toilet bowl with the leather bowl at the end, press down as hard as possible, there must be water submerged, and then lift it up violently. It must be fast and fierce, and it will be through in a few clicks. >>>More
That is the pressure of management, and there can be no steam leakage when pressing. You need some water.
The rubber drawer is aimed at the toilet spout up and down and back pressure, which is to forcibly discharge the blocked things by repeated pressure and enter the pipe, which is provided by the rate energy network.
Fill most of the toilet bowl with water, then aim the water plucker (i.e., toilet suction) at the sewer, press it hard, and then pull it up hard, and repeat it several times, and the toilet can be opened.