-
Anonymous users2024-01-23There are two types of lamp disassembly and assembly:
1. Lamp with two legs - need to rotate the lamp 90 degrees and remove it;
2. A lamp stand with a spring on one side of the lamp holder - you need to press the lamp on one side, and the other side will be separated from the base and the lamp tube will be removed.
Try both of these practices to see which one suits you.
-
Anonymous users2024-01-221. Disconnect the power switch.
2. If the height does not allow, it is recommended to use a 2M herringbone ladder and hold the ladder.
3. Pinch the lamp tube with both hands and rotate it at a certain angle appropriately, so that the direction of the two lamp feet on both sides of the lamp tube is consistent with the lamp socket slot of the bracket, and gently remove it. The opposite is true when installing. Stay safe.
-
Anonymous users2024-01-21Is it the kind of lamp that is long? If so, generally make sure that the lights are turned off, or turn off the main gate, or it is not safe. Then hold the lamp in your hand and slowly rotate it, and the light tube will come down.
Generally, this kind of tube lamp is not necessarily a problem with the lamp, it may be that the jumping cannon is broken, or it may be that the ballast inside is broken. Let's try to change the lamp first!
-
Anonymous users2024-01-20Turn off the closed-circuit switch first, the one outside the door, then see how the light bulb is installed, and then remove it as it is.
You are talking about the integrated ceiling, which should be repaired by the product seller or decoration company and the construction team, and if you disassemble it yourself, you need to insert a metal sheet into the gap to bring it out, and it is easy to damage it and cause deformation due to freehand operation; The lamp panel generally has a hook, and the finger can be put into the gap to make it fall off, and then disassemble the lamp to see where there is a problem
The tube is snapped in, and either end or one of the ends is elastic and retractable – this is the way to install it. >>>More
The buckle is movable, think about it carefully, and since it is not damaged, you can install it. If it really doesn't work, then find an electrician to help you install it.
It may be because of floor drains and sewers, and it has no offensive power against people. You can fumigate or spray, preferably with no semi-solid residue, or rinse with laundry water.
The method I use now is to sprinkle the soaked tea leaves with no moisture on the floor tiles, and push the tea leaves with a broom to remove the hair, which works well.