How to plug the toilet squatting and leaking

Updated on Bathroom 2024-03-22
4 answers
  1. Anonymous users2024-01-23

    The first thing to check is which part is leaking. Generally, there are two places where the water pipe and the drainage pipe are prone to problems.

    1. If the water pipe is leaking, strengthen the pipe connection, tighten the bolts, or change the pipe fittings;

    2. If it is a drainage, it is very troublesome, you have to get up the squatting to check whether the drainage pipe is leaking, or whether the squatting and the drainage pipe are tightly connected. It's a drain leak, and it should leak downstairs. At this time, you need to inform the people downstairs to be prepared, and if necessary, you should also notify the property management.

    3. If you can't check the leaking parts or you can't replace the parts for the reason, you can seek professional help.

    Measures to prevent water leakage in squatting toilets.

    1. The selection of materials should comply with the provisions of the relevant materials in the toilet low water tank accessories standard.

    2. The buoyancy of the ball (or floating barrel) should be calculated theoretically, at least under pressure, when the float is submerged 3 4 to ensure its sealing.

    3. When designing the accessories of the water tank, it is necessary to fully consider the free operation of each mechanism after its installation and not interfere with each other.

    4. The material of the drain valve cover should be appropriate, the production should be fine, and the protection during packaging and transportation should be strengthened to avoid deformation.

    5. The drain valve body can be formed at one time, and if it cannot be formed at one time, it is best to use the structural form of thread and water-resistant binder assembly at each connection.

    6. The lifting water inlet valve should have at least double sealing rings to ensure its sealing performance, and the water inlet valve should be equipped with a filter screen.

    7. Do a good job of cleaning and maintaining the squatting toilet regularly, and make an appointment with a professional to check the squatting toilet immediately if it is not found, so as to investigate and deal with hidden dangers in time.

  2. Anonymous users2024-01-22

    Please, master, repair the sewer.

    If you have decoration materials around, buy glass glue first, plug the leakage, you want, people will give.

    Choose to peel off the double-sided tape, the glue feeling is strong:) the rubber is soft.

  3. Anonymous users2024-01-21

    The general squatting leakage is leaked from the inlet pipe interface - do a good job of the connection between the squatting and the pipe!

  4. Anonymous users2024-01-20

    Don't do it yourself, find a maintenance worker, deal with it at one time, don't be afraid of trouble.

Related questions
1 answers2024-03-22

1. If the bathroom is leaking water from the waterproof layer, not the upper and lower water pipes. They can be repaired without planing tiles. >>>More

1 answers2024-03-22

First dredge the blockage, and then do waterproof treatment, you can buy some special bathroom waterproof coatings, there is a waterproof coating called leakage worry-free quality is very good.

4 answers2024-03-22

If the bathroom is leaking from the waterproofing layer, not from the upper and lower sewer pipes. They can be repaired without planing tiles. The maintenance method is very simple, which is to use a new type of penetrating waterproofing agent to waterproof the surface of the bathroom, so that the water does not enter the ground and flows directly from the waterway. >>>More

1 answers2024-03-22

You should be describing the situation of water seepage in the bathroom and the bathroom partition room, so you need to find the cause of the water seepage first >>>More

2 answers2024-03-22

Hello! The best and most effective way to do this is to reinstall!