The bottom basin of the shower room is blocked, and it is the spring loaded drain, which may be bloc

First use the screws to remove the drainage cover, and then find a slightly softer iron wire or copper wire about one meter long, the end of the hook, reach into the sewer pipe, hook the blocked hair, if you are lucky, you can hook out a large clump of hair, the problem is solved.

If it doesn't work, you have to remove the shower room and dredge it from the floor drain, which you probably can't do.

Use a rag to unscrew the lid counterclockwise and use the wire to hook the dirt out. Screw it back on.

Use a spring-type trap, poke and poke, and everyone will be happy if there is an effect, if you don't have it, ask a professional, use an air hammer, wash away, and pay attention to covering the drainage with gauze in the future, otherwise, the hair is easy to block.

The drain cover can be removed, 1. You turn it in a counterclockwise direction.

Clean up the shallow layer of hair garbage, then poke it with a metal pipe through the pipe, then pour some diluted sulfuric acid into it (if you can't get it, use a strong toilet cleaner), let it stand for a period of time according to the concentration of sulfuric acid (at least 20 minutes if you use toilet cleaner), and finally rinse with plenty of water.

If you do it yourself, you may break the hose under the basin, and the water may leak out from under the basin.

Dismantle the floor drain and use a wire to see if you can pick out some hair.

Or go to the supermarket to see if there is any powder for dredging, pour it directly to melt the organic matter.

The situation you said is that the hair is blocked, if you don't invite professionals, you can try it yourself, but the effect mainly depends on the distance from the drainage pipe of your shower room to the main drainage pipe, if it is far away, and there are many elbows, it may not be able to dredge, if the pipe is short, you will uncover the spring drainage cover, use a spring-type trap, poke it, and everyone will be happy if it has an effect.

Is the shower room movable? If it is an active construction, repair and replace the accessories to repair the operation is better, and the cost is relatively low: if it is embedded with tiles, it will be troublesome, and it will involve the problem of wall restoration, and the cost will be greatly increased; There is also a possibility that you may be able to do it yourself, according to my experience after a period of use is generally blocked by hair, you only need to rotate which spring drain counterclockwise, you can take it out, and then find a thin wire wrapped around a small piece of cloth, pay attention to the cloth and the wire must be tightened with pliers, so as not to fall in the drain pipe will be more troublesome, reach in and slowly turn in the clockwise direction to pull out the hair and other things, and then flush with a lot of water!

The little disc that was spinning and bouncing could be taken off and you could see the hair hanging on it.

First put the water source switch to the tube, go buy the same model to replace it, it's OK.

Just pick up what's in the middle and clean it up.

If you're a hands-on person, you can clean it up yourself, it's pretty simple.

It's better to hire a professional to save some time and effort.

The wire is bent in front of it in a J-shape, and it will be good to go back and forth a few times.