Do bathroom tiles stink to be redone

Updated on Bathroom 2024-03-21
1 answers
  1. Anonymous users2024-01-23

    This is caused by the quality of the tile - the tiles used are inferior glazed tiles, the carcass quality is not good, there is no good simple solution, only replacement!

Related questions
3 answers2024-03-21

In general, it does not take so long, and after knocking off the original tiles, you can re-use mortar waterproofing agent to do waterproofing after the ground is all dry, and it does not take 7 or 8 days to dry under normal circumstances.

2 answers2024-03-21

Measure how much your bathroom is, such as 5

When buying tiles, ask how big each tile is, for example, if the tile is 20*20, use 5 tiles. >>>More

7 answers2024-03-21

He smashes upstairs, and you do the renovation in your own home, and it won't affect each other. However, you can take this opportunity to urge him to do a good job of waterproofing the bathroom and implement it as soon as possible; After he completes the construction of the waterproof coating, he is required to do a 24-hour closed water test, so that you can clearly know their waterproof quality, which is good for you, so as not to have water leakage problems in the future, and then there will be trouble.

3 answers2024-03-21

In daily life, people may more or less encounter broken bathroom floor tiles. So the question is, does the bathroom need to be redone for waterproofing? What are the methods and precautions for purchasing bathroom floor tiles? >>>More

7 answers2024-03-21

The arc of the S bend of the outlet of the drain is not large enough, in order to save trouble: make a downward arc of the pipe between the toilet and the septic tank, and the radius of the arc should be greater than the lower interface of the pipe, so that the water can be retained in the arc to form a water seal; Or make an upward arc of the pipeline, and use the original squatting pit water level to increase the original squatting pit water level and form a water seal. You can draw a picture first, and then start it, so as not to break the cost and contribute to the effect is not good.