-
Anonymous users2024-01-23Generally speaking, the main materials for sanitary partitions are granite, ceramic tiles, marble, aluminum gusset plates, acrylic boards, etc.
Partitions are generally used in the bathroom: floor, top and wall, and this article will explain the choice of partitions in these three areas.
1. Bathroom floor.
The floor of the bathroom should be made of waterproof, dirt-resistant, non-slip granite, the height should be 10-20mm lower than other grounds, and the floor drain should be about 10mm lower than the partition, which is conducive to drainage.
2. Bathroom wall.
The wall area of the bathroom is the largest, and it is necessary to choose materials with strong waterproofness, corrosion resistance and mildew resistance, generally ceramic tiles and marble. Moreover, these two materials have many colors, can collage rich patterns, and are smooth and easy to dry, which is a very practical wall material, but it is necessary to pay attention to the unity of color with the ground material. For example, the sanitary partition of metal materials, in addition to being waterproof, the sanitary partition of this kind of material has many other advantages.
As. Lightweight, energy-saving, easy to install, maintain and recyclable;High strength, good stiffness, not easy to deform, large load; Even if it is impacted by external forces, it can maintain its shape.
Shape. It is not easy to changeGood sound insulation, heat preservation, heat insulation, moisture-proof, fireproof effect, non-toxic, environmental protection; And many more.
3. The top surface of the bathroom.
The top of the bathroom is affected by water vapor, which is most prone to mold, and it is better to use waterproof and heat-resistant materials, generally using aluminum gusset and acrylic ceiling. These materials have strong water resistance, and the surface of the wheel is pasted with thermal insulation materials, which is an ideal material for bathroom ceilings, and the specifications are mainly 120mm wide strips and 300mm*300mm squares, and the surface structure is flat and hollow. Acrylic molded ceilings are less expensive but prone to aging; The price of colorful molded aluminum gusset is high, but the colors are diverse, and the beams are durable, which is the main material used in modern bathroom ceilings.
In addition, there are also aluminum-plastic panels or calcium silicate boards, and the latter is coated with cement paint on the surface, which is lower in price and waterproof.
Due to the problem of the area where the toilet partition is used, we must measure it well when decorating the bathroom, buy it separately, and do not use all the same materials.
-
Anonymous users2024-01-22The office area and common area are equipped with special sanitary partitions.
And if it is a family, it is better to use lightweight bricks.
-
Anonymous users2024-01-21Moisture-proof board, preferably. It can be moisture-proof and applicable, particleboard can not be moisture-proof, the price of MDF is high, or moisture-proof board is suitable.
-
Anonymous users2024-01-20Glass magnesium board waterproof, fireproof, sound insulation and the advantages of various boards.
See what it is for, if you just want to separate the shower room, it is best to use tempered glass as a partition, if it is for the overall partition of the room, you can use light steel keel as a structure, gypsum board finish, and tiles on the outside. >>>More
Bathroom partition wall covering: tile, marble The bathroom has the largest wall area, and it is necessary to choose materials that are waterproof, corrosion and mildew resistant. Easy to clean tiles, marble, mosaics and other colors, can collage rich patterns, and smooth and easy to dry, is a very practical wall material, but pay attention to the color of the ground material unity. >>>More
Step 1: Install the fixing plate.
Find a suitable position on the wall to draw the center line of the fixing piece, see how many screw holes are fixed on the fixing plate, and then punch a few holes on the center line of the wall, put the plastic race sleeve into the hole, and then use the expansion wire to fix the fixing plate on the wall. >>>More
Windowless balcony window purchase common sense.
Kitchen socket installation height requirements. >>>More
Sanitary partition plate should be waterproof, acid and alkali resistant materials are better, anti-compact board is easy to deform, sandwiched aluminum honeycomb core in the middle, prevention and control of deformation, domestic are in the experimental state, must use good glue, Chengdu Meijiali decorative materials in the research and development of the effect reaction can still be, the metal plate is rusty inside, the paper honeycomb used inside, not deformed.