What is the resistance of a hair dryer in a toilet?

Updated on Toilets 2024-03-20
6 answers
  1. Anonymous users2024-01-23

    The power is 500W 1000W. The resistance is about 48 ohms and 100 ohms. Note that if there is a variable temperature, a diode is connected in series; If there is cold air, there is also a set of resistance wires with a large resistance value to work in series.

  2. Anonymous users2024-01-22

    An independent step-down resistor is used to provide the current of the DC motor in the series circuit, the motor is about 12V 6W, and the current is about A. So the step-down resistance is about 100W, and the resistance is about 500 ohms. Most hair dryers are powered by the main heating wire voltage divider, and the power is supplied by about 1 15 taps of the heating wire.

    You have to distinguish which type of electricity you have.

  3. Anonymous users2024-01-21

    The toilet hair dryer is an exhaust fan, with an impedance of about 500 and a power of about 100W.

    If the power is small, the impedance will be large.

    DC resistance in the tens of ohms.

    If it is a warm wind blower, the power is 1000W, the resistance is about 50, and there is a difference between the cold resistance and the thermal resistance.

  4. Anonymous users2024-01-20

    No matter how large the resistance is, it cannot replace the heating wire in the hair dryer. The greater the resistor power, the larger the volume, and it is not said to replace the heating wire in the hair dryer.

  5. Anonymous users2024-01-19

    As long as you measure it with a multimeter, you can know, but due to the different models of hair dryers configured, it is likely that this value will be different in other places.

  6. Anonymous users2024-01-18

    The resistance of the toilet hair dryer is about 100 ohms.

Related questions
3 answers2024-03-20

Turn on the exhaust fan, you turn on the suction fan, beware of blowing the smell of the toilet into the house.

12 answers2024-03-20

You can try to hook it out with chopsticks or wire, but if it doesn't work, call the person who dredges the pipe to help you get it.

6 answers2024-03-20

To get the water out of it, I used to do it once, and finally I put it in the sun, and the water mist dried, so it's best not to turn it on, because if you turn it on, there is water in it, so it is possible to burn out the things inside, and you can take it to the phone repair shop to see!

3 answers2024-03-20

Hello landlord, I can understand your current mood So I want to answer for you now Your mobile phone fell off the toilet and the mobile phone entered the water, please remember not to make any button actions, especially to shut down (one press any action, the water will immediately follow the circuit board flow string), the correct way is to open the cover immediately, directly take off the battery, and directly force the power off, which can protect the motherboard from being attacked by water. And you only said that it was blown dry I don't know if you have any other operations in the middle Just now I also went to check the appearance of the E63 Since the navigation key in the middle is still bright That means that the board can still be powered on Then the problem is the screen and the motherboard The next I don't know because I'm also a non-professional But you can follow my train of thought to find a repair shop to ask.

3 answers2024-03-20

Find someone to fix it.,If it doesn't work, throw it back to the toilet.,Just when the wood was picked up.,Psychological comfort is forgotten.。。