How to tear off the kitchen sink anti mold sticker after a long time?

1. When pasting the glass film, you must not tear the adhesive paper too much at once, first of all, you can only tear it a little, it is best to tear it from a corner, and then paste this corner to the glass and then slowly tear the adhesive paper a little bit, and then paste it on the glass little by little. 2. Before pasting the glass film, you must wipe the glass clean, which we all know, but it is best to spray some water on the clean glass, so that the glass film will not stick to the glass at once. 3. Air bubbles may occur, and many people's way to deal with them is to re-uncover them and then paste them. >>>More

How to get a more firm way to get tiles on the top of the kitchen Roll through a layer of glue on it must not be stickable, it is recommended to use cement mortar and then tiles, after tiling, it is recommended to use a flat wooden board under the tiles, and then put two wooden sticks to support the wooden board. Generally, ceramic tiles will fall down under the influence of gravity after being pasted with cement mortar, and it is not easy to stick firmly.

The socket and the bottom box are all standard parts, how can the panel not cover the bottom box, unless it is cut when cutting the tile. >>>More

It is not necessary, do not think about the typography of switches and sockets.

First of all, as long as the hot water outlet under the kitchen is open, the premise is that the water heater in the bathroom is not always on and boiling hot water, and the hot water outlet of the water heater is not connected to the wall, otherwise the hot water is generated from there!.