Why do LED lights in the kitchen break down so often?

There are three main reasons why kitchen LEDs often break:

Chip quality issues. Now the quality of LED chips on the market is uneven, if you buy a bad quality, it will definitely be easy to break. It is recommended that you pay attention to your selection.

2.Driving power, which is one of the main components of LED lamps, if the quality of the use is not good, the probability of lamps and lanterns will be greatly increased. Nowadays, many small brands on the market use resistor-capacitance power supplies, only considering brightness, not life.

A good brand uses IC intelligent power supply, which has functions such as stop short circuit, overvoltage, overload, and overstability protection, which greatly increases the life of LED.

3.Heat dissipation of the lamp body. The lifespan of LED luminaires is largely determined by the level of heat dissipation. LEDs with poor heat dissipation have a short lifespan.

So, if the LED is too cheap, don't think about it, you really get what you pay for.

Also, check to see if the heat dissipation in your kitchen is relatively poor.

I feel that it is caused by the unstable voltage of the circuit, and the lamp is burned out, so it is recommended to buy a bulb of better quality that can alleviate the situation of voltage instability.

Pay attention to electricity safety.

I wish the landlord good luck and happiness, and don't forget to reward me with an adoption.

Maybe the wires aren't installed! Or maybe you're buying a counterfeit one! Or if the humidity in your kitchen is very heavy, caused by a short circuit in the circuit board, you can check whether there is the kind of situation I mentioned here, refer to it! Hope it helps.

If the quality is not good, it is easy to spoil. Poor heat dissipation of LEDs can burn out the bulbs. However, most of the LED lights do not light up, which is a problem with the transformer circuit board. Can it solve your problem?

LEDs have a long lifespan, the quality is generally very good, and they are energy-saving, it is recommended that you check the circuit, whether it is a poor contact caused by the aging of the wire or the wire falling off.

Generally, it is not easy to break, maybe you bought an inferior lamp and went to change to a famous brand.

The quality is not good, find a merchant, I heard that the LED light can be used for about 10 years, and you are only broken in a few months, there must be a problem.

Hello to provide you with the following answer according to your answer: There are three main reasons why kitchen LEDs are often broken: chip quality problems.

Now the quality of LED chips on the market is uneven, if you buy a bad quality, it will definitely be easy to break. It is recommended that you pay attention to your selection. 2.

Driving power, which is one of the main components of LED lamps, if the quality of the use is not good, the probability of lamps and lanterns will be greatly increased. Nowadays, many small brands on the market use resistor-capacitance power supplies, only considering brightness, not life. A good brand uses IC intelligent power supply, which has functions such as stop short circuit, overvoltage, overload, and overstability protection, which greatly increases the life of LED.

3.Heat dissipation of the lamp body. The lifespan of LED luminaires is largely determined by the level of heat dissipation.

LEDs with poor heat dissipation have a short lifespan. So, if the LED is too cheap, don't think about it, you really get what you pay for. Also, check to see if the heat dissipation in your kitchen is relatively poor.