How do you paint old solid wood doors? How much does the paint processing fee cost?

How much is the manual cost, this depends on the local market price, generally charged according to the working hours, the price of a day may be about 100 yuan. The specific price is subject to the local carpentry market. The following is an introduction to the steps of the old wooden door.

The first step is to remove the handles and other decorations.

Remove the handles and other decorations on the wooden door to prevent the next step from scratching your hands, and it is also conducive to the uniform painting.

The second step is grinding.

1. Use coarse sandpaper to polish all the places that need to be painted, pay attention to the corners not to polish too much, and keep the original shape of the wooden door.

2. Dip a cloth in water, make it semi-wet, and wipe the powder on the wooden door that has just been polished.

3. Take the fine sandpaper and re-polish it, paying attention to the corners.

4. Clean up the powder with a water-soaked cloth.

This part is very important, so that the wooden door is painted more strongly.

The third step is to paint the paint.

1. Take the paint and brush, and open the paint cover.

2. Dip the brush in the paint bucket, don't get too much paint at a time.

3. The rules of painting are from top to bottom, from left to right.

4. Pay attention to the corners and hidden places should also be painted.

The fourth step is to dry.

Leave the painted wooden door for four to five hours until the paint is dry.

The fifth step is to polish again.

After the paint is dry, take a fine sandpaper and sand the wooden door again from beginning to end.

This time the purpose of grinding is to smooth out the uneven parts of the paint, which is conducive to continuing to paint later.

Step 6: Paint the second time.

Follow the third step above for a second coat of paint.

Note that if the paint is too thick, you can add an appropriate amount of rubber water, dilute the paint and then brush.

Then continue to dry and sand.

Step 7: Paint the third time.

Follow the above steps to paint again, so that the paint on the wooden door is finished.

The eighth step is to install the handles and other decorations.

Attach the decorations that were removed from the first step, such as the handle.

In this way, the entire wooden door is painted.

At this time, you will notice that the paint on the wooden door is uniform and beautiful, and the whole room is beautiful.

The cost of painting the old solid wood door depends on the style of the solid wood door: whether it is a panel door or the kind with a glass lattice, the employment of the two is very different. Then there is the difficulty of polishing. Explain your specific situation and help you.

Hello, this must be removed first, the original paint surface is removed, and after cleaning, cleaning; Now the general ones don't need to be painted, and the texture is not so good; Now it is basically spray painted, uniform and effective; As for the price, it is all based on the market, and your process is different. Think about it!

If you change the color, I recommend using spray paint, if you directly brush the blending paint, the aesthetics and flatness can not be guaranteed, when painting, you need sandpaper sanding, putty leveling, and then putty joints, and then secondary polishing, then spray primer, and then spray topcoat. This is a standard practice, made and the same as the new door, but the cost is not low, spray a door about 1000, of course, may be different regions. But it's better than you change a solid wood door, the general solid wood composite door is about 1800, and the pure solid wood is much more expensive.

First of all, it is necessary to see whether the new paint and the old paint are biting, brush a little first, observe for two days, and ask not to fall off, not to blister, and not to change color.

If there are signs of biting, buy a few pieces of coarse sandpaper, first polish the old paint completely even if you don't bite it, you also need to polish one side, but you don't need to polish so thoroughly to have a good effect, it is best to put on a layer of putty first, in the polishing smooth, the requirements are not high, you can directly brush the horizontal side and vertical side, wait for the paint to dry to the point that it is not sticky, and then horizontal and vertical.

First of all, I can't use latex paint to brush, your wooden door has been brushed before, it is best to shovel it off, in the ash, in the painting, I don't know what kind of paint you brushed before, if you don't shovel clean, the two kinds of paint are different, the price is different, the place is different, the price is not the same.

Then buy a bottle of white paint, which is estimated to be only a few tens of yuan, and then buy a paint brush for a few yuan;

In the past, the old solid wood doors were generally mixed with oil, and you used the finest sandpaper (generally 730) to polish off the paint on the surface, and the putty (those who sell boards are generally sold) do surface treatment (mainly for joint leveling) You can apply white paint White paint must be made of polyester paint (wood paint) White paint does not need to be primed There is also not to go to the hardware store to buy paint There are all metal paints There is no coffin on the brush door If your door is flat, you can consider buying some decorative panels (veneers are generally twenty or thirty pieces Buy red roses on the line, two veneers, four flat plates above the height of the meter) directly on the varnish is better.

For the time being, I haven't heard of painting the door with interior wall latex paint, and the water pipe and iron door painting can only go to the hardware store to buy metal paint (oil-based) Wood paint is a water-based paint Brush the wrong place, no chemical reaction, and it is useless If you don't have any aesthetic concept, what brush you use is the same (as long as it can be glued to a piece).

If you want to save money, then after sanding it yourself, buy your own paint brush. Find an oiler to make it for you, it's very expensive, it's better to buy one, it's not suitable.

I saw a lot of netizens give you a reply, some said that the salary is 100 per day, not so cheap, if you do it according to the process of spray painting, it is very expensive, it is not worth it, if you want to use the old door, you just get it yourself,

Wooden doors can be painted by painting or spraying. It is recommended to choose a safe and environmentally friendly water-based wood paint, which has no pungent smell and will not emit harmful gases.

The processing fee depends on the average price of the city where the landlord is located and the price of the paint used.

Unload it first, scrape off the original that can be scraped off, remove the garbage and dirt on the board, and then brush the place to be brushed lightly, brush evenly, place it in a ventilated and cool place to dry, and then brush it carefully and dry it.

Buy a bucket of Nippon Paint water-based paint, this paint has strong adhesion and no smell, you can brush it yourself.

General coating processing is according to the shape and size of the material to estimate the price, different shapes and different effects are included in the range of calculation price, paint cost calculation method is generally per kilogram of paint coating area is about 6 square meters, the cost of paint accounts for 1 10

Are you simple and cheap? Buy your own barrel paint, preferably more covering than yellow dark spots.

The 97th episode Lin Daiyu burned the manuscript to break the infatuation, Xue Baochai came out of the boudoir and became a big gift The 98th episode The soul of the bitter pearl returned to hate the sky, and the sick god Ying shed tears and lovesickness.

The eighteenth round: The father and daughter of the bead curtain are loyal and diligent, and the sisters and brothers are in charge of the song.