-
Anonymous users2024-01-23The most critical thing to move the toilet position is that the bottom eye and drain hole are not in the original position.
It is not possible to miss half an eye, and the middle hole and the gutter hole on the lower edge of the toilet must be relatively normal, otherwise it will lead to poor bowel movements.
Whether it is good to flush after adding the elbow is a secondary problem, and the key is that there will be endless troubles after moving.
There are anti-water bends, but it is easy to string gas when shooting straight, and the sewer gas is easy to turn up when draining.
There is no "anti-water bend", it will definitely be tasteful. >>>More
The toilet comes with an S-shaped trap, if there is a trap in the drain pipe, the toilet suction will be affected and it is easy to block.
This depends on the layout of the bathroom. Think about the location and layout of the bathroom basin, toilet, shower, washing machine, etc. Depending on whether your bathroom is long or nearly square. >>>More
The movement of the toilet position will affect the flushing problem, because the drain pipe of the toilet bowl and the water supply pipe of the water tank are fixed, if the position is moved too far, it will cause the drain pipe and water supply pipe to not be connected to the correct position, which will affect the flushing effect. Generally speaking, if you need to move the position of the toilet bowl, it is best not to exceed 10 cm away, so as to ensure that the connection between the drain pipe bench and the water supply pipe will not be affected too much. If you need to move more than 10 cm, it is recommended to seek the help of a professional to ensure that the toilet can be used normally.