-
There is no other way but to rework.
-
Use elastic putty to widen the mesh band.
Shovel off the latex paint you made before along the cracks, then paste kraft paper, and then it's the steps to make latex paint.
Here's how to fix it:
1. Laying direction, transverse and longitudinal fixation, the strength performance and deformation of gypsum board are determined according to the direction, the longitudinal performance of the board is superior to the transverse, so the ceiling is not allowed to be parallel to the longitudinal and overlying keel, should be perpendicular to the keel, gypsum board must be installed in a stress-free state, the installation of the ceiling board is temporarily supported by wooden support, and the board is pressed with the skeleton, the support can be revoked only after the screw is fixed, and when the fixed plate is installed, it is fixed from the middle of the board to the four sides, and no more points are allowed to work at the same time. >>>More
First, glass glue should be used between the gaps.
Second, use kraft paper again. >>>More
The ceiling has light steel keel gypsum board, squares, splints, etc. There are many types of ceiling styles, all kinds, and different characteristics. The first is light steel keel gypsum board. >>>More
The steps of gypsum board ceiling are as follows:
First of all, according to the scheme of the design drawings, determine the elevation, after the horizontal line is played, the keel begins to play, the keel is generally carried out with white pine material, if you do a little more elegant, you will use red pine or sylvestris pine. Some renovation companies deliberately make a fuss about this, because the less wood consumed, the greater their profits! >>>More