How to do a good job of waterproofing the shower room

1. Waterproof material: The waterproof material should choose one-component environmentally friendly polyurethane coating, which is the waterproof material recommended by the Ministry of Construction. Because the paint can tightly wrap the pipe and the ground, penetrate into the gaps, and will not shrink after drying, it is more suitable than rigid materials such as waterproof cement for small areas of houses with many pipes and gaps in the bathroom.

2. Paint application: In order to make the waterproof period more durable in the future, the paint generally needs to be brushed 3 times, in order to make the paint fully dry, so it can not be selected in a rainy or humid climate. Generally, the drying period of one-component environmentally friendly polyurethane coatings is about 3 to 4 days.

3. Waterproof disposal: Generally, the wall of the bathroom should also be waterproof about 30cm high, and the wall should also be waterproof, in order to achieve a better waterproof effect. Prevent stagnant water from penetrating the walls.

The wall adjacent to the bathtub should also be higher than the upper edge of the bathtub. So what should some families do if they use the shower room? In particular, one wall on which the shower room fittings are installed should be paid more attention to in terms of waterproofing.

Generally, the leakage of water in the bathroom is a problem with the detailed structure of the building. The three places of floor drain, wall corner and pipe root are prone to gaps due to the many interfaces, so these three places are generally more prone to water leakage. In addition, if the connection between the drain and the sewer pipe in the bathtub or shower room is not tight, it is easy to have gaps and leakage.

The waterproofing of the bathroom should be done well, otherwise it will be very troublesome to have a water leakage problem. The new shower room manufacturer will tell you what work to do in the bathroom waterproofing.

Waterproof material. The waterproof material should choose a one-component environmentally friendly polyurethane coating, which is currently recommended by the Ministry of Construction. Because the paint can tightly wrap the pipe and the ground, penetrate into the gaps, and will not shrink after drying, it is more suitable than rigid materials such as waterproof cement for small areas of houses with many pipes and gaps in the bathroom. When buying this kind of paint, you should choose brand paint, and the cost of materials per square meter is about 50 60 yuan.

Paint applied. In order to make the waterproofing period last longer, the paint generally needs to be brushed three times, so it is not possible to do it in rainy or humid climates in order to make the paint dry enough. Generally, the drying period of one-component environmentally friendly polyurethane coatings is about 3 to 4 days.

Waterproof disposal. Generally, the wall of the bathroom should also be waterproofed about 750px high, and the wall should also be waterproofed in order to achieve a better waterproof effect. Prevent stagnant water from penetrating the wall. The wall adjacent to the bathtub should also be higher than the upper edge of the bathtub.

So what should some families do if they use the shower room? In particular, one wall on which the shower room fittings are installed should be paid more attention to in terms of waterproofing.

Water injection test. After the construction is completed, all the sewers of the toilet should be blocked, and the door of the toilet should be built"Low wall"The water injection test was carried out, and the water injection height was about 500px. After 24 hours, if there is no leakage on the walls and floors around the bathroom, it means that the waterproof quality of the bathroom is very good. On the contrary, it is necessary to find out the leakage point and carry out repairs.

To do a good job in the waterproofing of the shower room, the first thing is to choose the right waterproof material, and secondly, it is necessary to have a standard waterproof construction, so as to ensure a good waterproof effect.

The shower room is a stable part of the house structure, and at the same time, the area is narrow and there are many pipes that have to be exposed to water for a long time, so the requirements for waterproofing are relatively high, and the most permeable part of the shower room is concentrated in the yin and yang corners, through the pipe, sanitary ware, floor drain and other places, so it is recommended to use kitchen and bathroom waterproof slurry when doing waterproofing, first use the quick-setting repair mortar to strengthen the leakage repair, and then use the prepared permanent waterproof slurry to do waterproofing as a whole. In this way, the special waterproof effect of the special material is definitely better than the general material effect.

As for the construction, the shower floor needs to be all waterproof, the wall should be at least meters, it is recommended to do full height, if it is a lightweight wall, then it must be done full height.

How to do the shower room waterproofing.

The waterproof material should choose a one-component environmentally friendly polyurethane coating, which is currently recommended by the Ministry of Construction. Because the paint can tightly wrap the pipe and the ground, penetrate into the gaps, and will not shrink after drying, it is more suitable than rigid materials such as waterproof cement for small areas of houses with many pipes and gaps in the bathroom.

In order to make the waterproofing period last longer, the paint generally needs to be brushed three times, so it is not possible to do it in rainy or humid climates in order to make the paint dry enough. Generally, the drying period of one-component environmentally friendly polyurethane coatings is about 3 to 4 days.

Generally, the wall of the bathroom should also be waterproofed about 30cm high, and the wall should also be waterproofed in order to achieve a better waterproof effect. Prevent stagnant water from penetrating the walls. The wall adjacent to the bathtub should also be higher than the upper edge of the bathtub.

So what should some families do if they use the shower room? In particular, one wall on which the shower room fittings are installed should be paid more attention to in terms of waterproofing.

After the construction is completed, all the sewers of the toilet should be blocked, and the door of the toilet should be built"Low wall"The water injection test is carried out, and the water injection height is about 20cm. After 24 hours, if there is no leakage on the walls and floors around the bathroom, it means that the waterproof quality of the bathroom is very good. On the contrary, it is necessary to find out the leakage point and carry out repairs.

Hope the above can help you

As long as the installation of the shower room is done well, it has the effect of waterproof splashing.

1. Waterproof material.

Waterproof materials should choose one-component environmentally friendly polyurethane coatings, because the coating can tightly wrap the pipe and the ground, penetrate into the gaps, and will not shrink after drying, so it is more suitable than waterproof cement and other rigid materials for small areas of houses with more pipes and gaps in the bathroom.

Second, paint application.

In order to make the waterproof period in the future more durable, the paint generally needs to be brushed 3 times, in order to make the paint fully dry, so it is not possible to choose to do it in a rainy or humid climate. In general, the drying period of one-component environmentally friendly polyurethane coatings is about 3 to 4 days.

3. Waterproof disposal.

Generally, the wall of the bathroom should also be waterproofed about 30cm high, and the wall should also be waterproofed. The wall adjacent to the bathtub should also be higher than the upper edge of the bathtub. In particular, a wall where shower room accessories are installed should be paid more attention to in terms of waterproofing.

Fourth, how to do a good job in the waterproof work of the shower room - water injection test After the construction is completed, all the sewers of the bathroom should be blocked, and a "low wall" should be built at the door of the bathroom for water injection test, and the water injection height should be about 20cm. After 24 hours, if there is no leakage on the walls and floors around the bathroom, it means that the waterproof quality of the bathroom is very good. On the contrary, it is necessary to find out the leakage point and carry out repairs.

Buy a waterproof shower room, Andrema's shower room waterproof adhesive strip is easy to use, good water retention, dry and wet separation, and the shower will not leak.