-
Anonymous users2024-01-23You use a hand-cranked wire cleaner to bring out the things that are blocked inside, insert the cleaner into the tube, and when you shake the wire, you will turn it inside and turn the blocked things out or poke them over, and you can use hot water to flush them, so that they can be plugged with grease and vegetable leaves, and you can poke them with what I said.
-
Anonymous users2024-01-22You may need to unclog it, you buy some unclogging agent, or use that newly bought toilet plug and catch him and try to unclog it?
-
Anonymous users2024-01-21Isn't there an opening at the bottom? Just unscrew it on.
-
Anonymous users2024-01-20Pump with a water pump. That's it. Do you understand?
Upstairs there is a toilet with this sewer pipe.
The cause of water leakage can not be the problem of pressure, the problem will only come out of the pipe connection, it is recommended that you find a good plumber to help you reconnect the sewer pipe, it is likely that the rubber ring position at the interface is not put well, the general leakage will not be related to the pressure, it will only be the problem of the joint, and often hit the glass glue when connecting these joints, that thing is generally not used, as long as the rubber gasket is pressed correctly, the raw tape is tied firmly, and it will generally not leak.
Unclog the pipes! Just find someone to unblock the blockage.
When you connect the U-tube, you must have a leak screen to filter out the impurities in the water. If not, your U-tube can easily clog. After the parade pipe is blocked, it is recommended that you use a cannon dredge to dredge it. >>>More
In general, there are two ways to unclog pipes: chemical methods (such as pipe dredging agents such as pipe dredging) and physical methods (using pipe dredging machines for dredging). >>>More