-
Anonymous users2024-01-23I have to be very careful with the saw blade, and I occasionally used this method to saw for a long time, and I knocked the pipe on the silk I had to invite the master in the morning, and his method was fast and good 1Find a "plug" of the water pipe (that is, it is used to block the water pipe interface during decoration, even here is called a plug, to iron) with a wrench to screw the "plug" into the water pipe interface, and screw it firmly 2When the "plug" is reversed with a hose wrench, and when the "plug" is rotated out, the faucet pipe that is broken in the wall is brought out.
This is the easiest way to do it. Don't worry about sawing the pipe to break the wall and change the pipe: dig a small hole at the broken joint, put the plug into the broken pipe and twist it, and rotate the plug in the opposite direction to bring out the broken pipe.
-
Anonymous users2024-01-22Find a pointed gun to remove. It shatters when you hit it. Or find a plumber to do it.
-
Anonymous users2024-01-21It is difficult to take out the external thread of the faucet when it is twisted in the wall, so it is necessary to use a sharp tool to knock off the internal thread of the water pipe little by little without touching it
It's to make the big bai
When the people of Lishi opened the hole, they did not calculate the distance and opened the hole, two dao methods: >>>More
Generally speaking, the correct use of the faucet means not to rotate the faucet too tightly, and the faucet rubber mat can maintain the life of the year. >>>More
1. Whether the tap water pressure of the user's home has become smaller than before >>>More
1. See if the sewer pipe is broken, if it is a PVC water pipe, you can buy a PVC water pipe to connect it yourself, first cut the broken pipe, put the interface into one end of the pipe first, so that the cutting position of the other end is just flush with the other mouth of the interface, so that it can just be straightened, and then send it directly to this end, so that both ends have a certain cross distance (length) and then disassemble it. Apply PVC glue to the inside of the two ends and the outside of the two sewer pipes, and then apply it to the pipe according to the above method. >>>More
How big is the splash head? If it's the blistering head of the faucet, such a small thing will generally be washed away, and it's fine. However, if it is the kind of splash head that was added later, it is relatively large, and it will generally be stuck behind the reverse bend and need to be removed from the toilet.