Brothers and sisters, what should I do if the bathroom radiator leaks? Sad

If you have changed the heating yourself, no one will take care of it, there are radiators sold on the first floor of the United States, and there are installation and maintenance.

Three points to note.

First, it can also be repaired, but it needs to be removed for maintenance, some of which need to be welded Second, for the installation, do not install it yourself, you must find a manufacturer who buys heating for installation, because there will be an insurance problem, the new heating has a problem, if they install it, they will pay for water leakage.

Third, it should be noted that the heating contract number purchased should be the same as the installation contract number.

If the valve is good, it can be replaced if the water is intercepted, otherwise it can't.

1. In the case of water leakage of radiators at home, users first need to carefully find the leakage part.

2. Because the heating system is divided into two ways, there are at least 2 control valves. Therefore, after finding the leakage site, then find the control valve of the leaking part.

3. Rotate the determined control valve clockwise until it cannot be screwed.

4. After closing the valve, observe whether the water leakage situation has improved, if not, it means that the valve is out of order or the wrong valve has been selected.

5. After the above process is completed, the user should immediately call the heating maintenance center, or contact the manufacturer to purchase the radiator, and deal with the water leakage as soon as possible.

After repairing and repairing, you might as well change it again, and it won't be too expensive!