If the toilet ceiling light is broken, who will remove the lampshade, help, I don t know how to remo

Cut off the power first. If it is an integral cassette lamp, you can directly remove the lamp by holding the lamp tray with both hands. If the inner fruit is a lamp plate buckle type ceiling lamp, first use a flathead screwdriver or blade, insert it in the middle of the transparent cover and the white edge to force outward, there will be a big crack, you can see that there are three clips on the cover, put the screwdriver in the position with the card, and then force outward, see that the card is not stuck in the inside, in the upward force, get out of a card, the remaining two cards can be easily opened, and the lampshade can be pulled out by hand.

There are many kinds of 1, and the hand holds the hood and rotates counterclockwise. 2. There is a small button on the edge of the lamp holder, press it once, or break it left and right. 3. If the lampshade is directly stuck on the lamp holder, it should be warped with a flat mouth. Hope it helps.

Use a blade or something thin, the hardness should be enough, (there are small gaps between each piece of the integrated ceiling) Use the blade to plug the gap near the lamp to warp the board down, and then remove the lamp to get it. Just put the board on when you're done with it.

This transparent cover can be pulled down, and it has four notches around it that are inserted into the white lamp, and it can be tilted down symmetrically on both sides with a blade or a flat screwdriver. >>>More

There are 3-4 iron clips around the general ceiling lamp lampshade, because the lampshade is generally invisible, you can touch it by touching the top of the lampshade with your hand, and you can take the lampshade off by pulling the clip, but be careful, the lampshade is easy to fall off after the clip is released, and you should hold the lampshade with one hand and loosen the clamp with one hand.