Bathroom wall tiles seep water, is there any good way to waterproof?

1. Cause analysis.

The waterproofing of the bathroom is not in place; The second is a broken water pipe inside the wall that causes water to leak.

There is also in the rainy weather, due to the humid air, resulting in water on the surface of the tile; Finally, the tile gaps are not good, and there is water seepage.

2. Solution:

If there is a problem with the waterproof layer, the tiles must be removed, the wall must be hit to the waterproof layer, and it is better to see the inner wall, and then scrape the putty again, re-make the waterproof layer for the wall, and then pave the tiles.

The second is that the water pipe rupture leads to water seepage, in this case, the water pipe needs to be tested to see if there is a water leakage, if it is indeed caused by the water pipe damage, to find out the leakage immediately, open the wall and replace the water pipe.

If the wall is only leaking because of moisture, you only need to pay more attention to the ventilation and cleaning of the bathroom in your daily life.

If the tile gap is not good, there is water seepage. First you need to use cement or caulk to fix the cracks, and then make a layer of waterproofing.

The cement mortar used in construction should be selected in a good proportion, and the performance of high impermeability is good.

Whether it is water absorption or seepage from the inside out, more information, better advice, free professional technical consultation for concrete waterproof leakage repair, to avoid the trouble of repairing today, leaking tomorrow, repairing every year, and leaking every year.

Generally, ceramic tiles can also be waterproof, it may be that the tile joints are seeping water, and it can be better to refill the floor tile joints with waterproof caulk!

You can try it first

First, the waterproof should be 30 cm above the ground.

Second, the quality of wall tiles should be bought.