What to do if the living room water floor tiles bulge, it has been 12 years of decoration, and it is

Updated on Living room 2024-03-22
2 answers
  1. Anonymous users2024-01-23

    I've encountered this situation before: pick up the upturned bricks, re-pavement, and cut them when the edges are closed.

  2. Anonymous users2024-01-22

    It must be to change the floor, otherwise there will be potential safety hazards, and now the floor tiles are rarely used, and they are all used to find the floor that can be laid directly on the original floor, such as Fushijia PVC lock floor.

Related questions
3 answers2024-03-22

One is the easiest, clean up the debris such as the floating and sinking of the ash layer, scrape a thin layer of cement mixed with water, and then put the bricks one by one (to ensure that the net ash inside is sufficient), and then gently tap with a rubber hammer to squeeze out the excess cement. The downside of this is that the tiles may be a little on the higher side; The second method is to remove a certain thickness of the base sand ash with a chisel to ensure that a certain thickness of sand and ash can be used, so that it is more regular to lay the sand and ash.

1 answers2024-03-22

One is the easiest, clean up the debris such as the floating and sinking of the ash layer, scrape a thin layer of cement mixed with water, and then put the bricks one by one (to ensure that the net ash inside is sufficient), and then gently tap with a rubber hammer to squeeze out the excess cement. The downside of this is that the tiles may be a little on the higher side; The second method is to remove a certain thickness of the base sand ash with a chisel to ensure that a certain thickness of sand and ash can be used, so that it is more regular to lay the sand and ash.

2 answers2024-03-22

Get a professional to warp him out and reattach it.

1 answers2024-03-22

Use a sharp blade to cut the floor tile joints along the four sides of the floor tiles, fully release the gas in the floor tiles, and gently press the floor tiles back into place.

13 answers2024-03-22

This is the tile hollow bulge, there are many reasons, a master at the time of the work of the mixture did not mix Jun, two floor moisture is not sprinkled enough, three with a long time, thermal expansion and contraction, the formation of a hollow drum, for personal safety, please replace the damaged repair as soon as possible, in view of the phenomenon you said, you can use a small iron solid core steel bar to knock the bulging cloth, you can use the method of listening to the sound of the braid, the sound of the hollow drum is a porphyr, no empty drum is a clear sound, I don't understand, please decorate the master to see.