Have you pressed the two flush buttons on the toilet by mistake?

Why should the button on the flush tank be made into a large and a small one? Most people only know that this is used for flushing, so many people press it casually after going to the toilet, and they don't know how to press it!

> First, the structure of the water tank.

Generally speaking, there are structures inside the toilet tank.

Floats, inlet pipes, drain pipes, levers, plugs,

The combination of these such as the flush button forms a flushing structure

>So how does it work?

When we finish using the toilet, press the flush button, the button will lift the plug through the lever, and the water tank will drain the water through the drain pipe.

After a certain level of drainage, the water plug in the drain pipe will fall and block the water outlet

> at this time, the float will also fall with the water surface, driving the lever to pull up the water inlet valve, so the water begins to enter the water tank again, and the float will continue to rise because of buoyancy, and finally drive the lever to press down the water plug, and the water plug refers to the ant to re-block the water inlet, and then you can start a new round of flushing

> 2. The meaning of the two buttons.

In fact, these two buttons are designed to save water!

Choose different flushing amounts according to different situations, which can not only flush the toilet, but also save water!

The smaller button represents a half-flush of water, and pressing it will only put one-half or one-half of the water buried by Weiweihui, and will not drain all the water in the tank at once

The larger button means flushing with water, and pressing it will drain the water in the tank at once

If you press both buttons together, <>

3. Five commonly used pressing methods.

The big button is generally used for defecation, and the small button is generally used for urinating, because the functions of the two buttons are different, and the corresponding pressing method can be selected according to different situations, so as to achieve the effect of energy saving and water saving

3. Tap the small button.

It is suitable for urine with a relatively small amount of washing;

4. Press the small button again.

It is suitable for urine with a large amount of washing

5. Press two at the same time.

This impulse is the greatest, the most watery, and if the amount of stool is particularly large.

Or if the viscous flush is not clean, you can choose this method to save money and start by flushing the toilet!

The flush toilet is equipped with two flush buttons to save water. The big button is pressed after the big solution; The small hole calendar button is pressed after the small solution.

During the time of Queen Elizabeth I of England (1558-1603), there was a British priest named John Harrington, who was a lover of literature and was sentenced to exile for spreading a so-called immoral story.

Between 1584 and 1591, he built a house in Kelston, England, where he designed the world's first flush toilet, which was connected to a cistern and installed in the house.

Priest John Harrington was so proud of the invention that he named it after one of Homer's heroes, Ajax.

Later, Priest John Harrington also wrote the book The Metamorphosis of the Night Pot, which detailed the design of his flush toilet. However, the British public at the time did not accept the invention, and they still liked to use a commode for socks.

In 1775, a London watchmaker named Alexander Cummings improved Harrington's design, and Najansou developed a flush toilet, which was patented for the first time. 1

One large and one small, can also be pressed at the same time.

No, the large flush has a large amount of water and is used to flush the stool, and the small one rinses the urine.