The bathroom wall was waterproofed, and after the water was changed, the water pipe reservation was

Updated on Bathroom 2024-03-21
4 answers
  1. Anonymous users2024-01-23

    The waterproof layer is made on the surface of the wall, and the water seepage is in the wall. The water enters the wall at the seepage point, and the waterproofing layer loses its effect.

  2. Anonymous users2024-01-22

    The waterproofing of the bathroom wall and floor has no effect on the leakage of the wall, and the leakage of the water pipe head will flow along the wall in all directions, and the direct victim is downstairs!

  3. Anonymous users2024-01-21

    Is the waterproofing still intact after the water change? Whether the pipe is leaking or not can be detected by pressure test.

  4. Anonymous users2024-01-20

    The waterproofing of the wall does not necessarily work, the waterproofing should be a whole, make sure that the yin and yang corners of the ground and the wall are waterproof? If the yin and yang corners leak, they will also go down the wall.

Related questions
Bathroom waterproofing, after the water change is completed, how to waterproof the pipe on the groun
8 answers2024-03-21

Since it is done, it is recommended that you test the pressure of the pipeline first, which is not a water test, and the pressure test is higher than the usual water pressure, and there is no problem with the pressure test, so as to ensure that the water does not leak in the future. Then do waterproofing first, and after the closed water test is no problem, carry out follow-up construction. In this way, the water pipe leakage will not go downstairs, and it can also protect the water pipe.

After 2 days of waterproofing, the bathroom was waterproofed and found that there were three bubblin
2 answers2024-03-21

Acceptance criteria: After 24 hours of filling with water, check that there is no leakage at the bottom of the board, that is, this is qualified! This is known as the "closed water test".

The bathroom leakage has been repaired, and the waterproof has also been done, and the water is not
1 answers2024-03-21

The last sentence is not clear, the water leakage problem should be checked first? What is the situation that causes the water leakage, whether it is water or water, and then solve the root cause problem, and then consider re-tiling.

The bathroom has been waterproofed but forgot to install a faucet, is there any remedy?
2 answers2024-03-21

If the water pipe is on the wall, it is easier. Knock out the water pipe mouth in a small area, connect the water pipe, level the cement, and then carefully handle the cracks with polyurethane type flexible waterproof coatings, and apply waterproof materials at least 30CM around the cracked places. and the water pipe, it is necessary to focus on applying a few more layers. >>>More

How to dispose of toilet water after waterproofing?
4 answers2024-03-21

1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More