-
Anonymous users2024-01-23(1) Initialization.
Press the touch button on the motherboard to start initialization.
2) Enter the password.
Press the "Add" button, "Enter the administrative password, end with the sign"; After entering the management password, enter the door opening password, press the number key to confirm; Re-enter the door opening code and press the number button to confirm.
3) Enter your fingerprint.
Press the "Add" button, after the prompt tone, "Enter the management password, end with the sign"; Then press the fingerprint, after the first successful entry, it prompts "enter again", and press the fingerprint again to enter successfully.
The anti-theft door is equipped with an anti-theft lock, which can resist abnormal opening under certain conditions within a certain period of time, has a certain safety protection performance and meets the corresponding anti-theft security level.
-
Anonymous users2024-01-22The steps are as follows:
Step 1: Press the power supply button at the bottom of the outer panel, press the '*' button three times, and the buzzer will make a long sound;
Step 2: Enter the old password and press the '' button to confirm, the buzzer will make a long sound, and the LED light will flash;
Step 3: Enter the 6 12-digit new password and press the ' key to confirm, the buzzer will make a long sound;
Step 4: Enter the same new password again and press the '' button to confirm.
The above is the steps of how to change the password of the password lock, in the setting process, if there is an error in the input, the system exits the setting procedure, if the input is correct, the buzzer sends a long sound (or music sound) to indicate success, and the LED light goes out.
This is to know the brand, model, each brand and model is not necessarily the same. Most M is the menu key, OK is the confirmation key, and C is the No or Exit key.
How to reset the code for a smart door lock.
The combination lock of the password anti-theft door is mainly divided into two types: mechanical password lock and electronic password lock, which can generally be reset. However, each manufacturer's rental method is different, it is best to find the manual to see, follow the instructions step by step, no manual to the Internet to find the corresponding wild guess manufacturer, download the electronic version of the manual, or call the after-sales service phone to ask about the method of setting the type.
Push the password as far as you can in the opposite direction of the switch. >>>More
Anti-theft door smart password lock installation skills: 1, the inner and outer panels are not equipped with handles, according to the left and right direction of the door, please first install and fix the handles on the inner and outer panels, please be careful not to install them in reverse. 2. Insert the lock cylinder into the lock body hole, slightly tighten the lock cylinder bolt, and turn the lock cylinder lever, one is to verify that the lock cylinder is installed in place; the second is to verify whether the unlocking status is smooth; After confirming the qualification, fix the lock cylinder bolt, and the lock cylinder lever is exposed to 15+-3 mm. >>>More