-
Anonymous users2024-01-23It can be a large-area ceiling, but it must be flattened with a keel, and the gypsum board can not be used alone with steam nails, but also must be fixed with self-tapping nails, and it is not recommended to use wooden keels for large-area ceilings, and it is recommended to use light steel keels. Among them, after scraping the putty after the gypsum board is scraped with a lamp, there is no obvious black shadow for qualified, and it will generally not crack if it is solid. It depends on the level of your workers.
-
Anonymous users2024-01-22Yes, that thing can be used as a partition, you can also make calcium silicate board, of course, the cost is relatively high, gypsum you can do a small area of partition, so that there will be no large piece of construction, there will be no cracking.
-
Anonymous users2024-01-21Engineering decoration is rarely a large area of gypsum board ceiling.
Be sure to use: it is recommended to use light steel keel, good quality gypsum board, and do seam treatment, according to the plane design plan, plan out a regular seam pattern. The seam is one centimeter.
If it is the case of separating the light trough and the secondary shed, then it is no problem. Note that the spacing of the hanging ribs should be determined according to the quality of the 38 main bones, and it is beneficial to be conservative.
-
Anonymous users2024-01-20Hello! It is very easy to crack.
Therefore, calcium silicate boards are mostly used.
Of course, if it is dealt with, there is no problem.
It is not easy to add plates to fix between the gaps of gypsum board, and use elastic putty and paint to type at the same time, so adopt it!
The main keel did not fall, the auxiliary keel came down, that is, there was a problem with the connection between the main keel and the auxiliary keel, and it had nothing to do with the self-tapping screw. >>>More
Generally, few people brush it. Brush this is mainly afraid of fire caused by short circuit of wires, but now when decorating, the wires have casing or something, and the probability of short circuit is relatively small. If you can afford it, it's certainly better to brush it.
Whether the gypsum board ceiling can be installed on the roller lamp plate, the following issues should be considered: >>>More
In general, the top of the shape is counted, and very rarely according to the size of the room. The partition wall is half of the door and window. I don't understand the ceiling you are talking about, is it that you have a hole in the middle of the ceiling? >>>More
One is to look at personal preferences.
Second, if there are renderings, follow the renderings to the overall effect is good, and third, it is recommended to select the light selection board line or the gypsum line with a simple pattern. >>>More