My bathroom real estate developer designed a dry and wet separation, but the dry area wash basin to

SUNKEN TOILET: REFERS TO THE PARTIAL OR OVERALL SINKING OF THE STRUCTURAL LAYER OF THE TOILET FROM THE CORRESPONDING FLOOR AT A CERTAIN HEIGHT (GENERALLY 40CM) DURING THE CONSTRUCTION OF THE MAIN BODY, SO THAT THE HORIZONTAL DRAINAGE PIPE OF THE TOILET IS BURIED IN IT, AND THEN BACKFILLED WITH LIGHTWEIGHT MATERIALS, AND ONLY ONE HOLE IS REQUIRED FOR THE USE OF DRAINAGE RISERS IN THE STRUCTURAL SURFACE. Drainage risers are reliably set in the corners of the walls, and can be covered with external curved partitions when the owners decorate. >>>More

The area is the length multiplied by the width, i.e

The size of your bathroom is square meters. >>>More

The bathroom at home is a dry and wet partition type, of course, it can be installed with an Opu bath bomb and installed in the wet area.

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry. >>>More

Today's bath bombs are basically air-warmed, and they are almost the same wherever they are installed.