-
Anonymous users2024-01-23Let's start with a simple solution, add some washing spirit to the water tank and press it a few more times to try.
If it doesn't work, then you have to change.
-
Anonymous users2024-01-22Generally, the button spring inside is broken, or something else, if you know a little about maintenance, you can take it apart and see it yourself, maybe it's a small reason. The reason why my house is not in the water is that the air cushion is sticky, and it will be good if you poke it open. However, you must remember the installation order, otherwise you will not be able to disassemble and install it back.
-
Anonymous users2024-01-21It's not easy for you to fix this yourself, it depends on whether you understand how the tank works.
It should be stuck, you open the tank and take a look.
The flush toilet consists of the following main parts: inlet pipe, outlet pipe, seepage pipe, water plug (inlet and outlet), float, drain knob and lever, water refill mechanism, water tank, urinal (the urinal has a bend that connects to the water tank). >>>More
Pressing the button is useless without flushing may be two cases. >>>More
In general, there are two buttons in the toilet, one larger and the other smaller. The larger water output is larger, and the large solution is clean. The smaller water output is smaller, and the urine flush saves water.
Don't flush with water, just remove this button and remove the sand.
Gas alarm, find someone from the gas company to come to check.