How to repair the shower of the bath bomb if it is broken, how to repair the shower in the bathroom

Updated on Bathroom 2024-03-28
2 answers
  1. Anonymous users2024-01-23

    If the shower is dehydrated, you can choose to change the shower, because if you are connected to the broken one, you must change the shower, so if it is just a simple leakage, you can choose to make up for it, or you can also tighten the interface a little.

  2. Anonymous users2024-01-22

    You can try to use the kind of waterproof glue that is now available online, and it is very reliable. In addition, there is also that kind of waterproof adhesive tape, which means that if there is a leak in the water pipe, you can wrap it around directly. But when using it, be sure to let him wrap it around when there is no water, and then wait until it is dry before using it.

Related questions
2 answers2024-03-28

There is a red and blue plastic piece attached to the handle, indicating hot and cold water, pry it open, expose a hole, use a Phillips screwdriver to twist the screw counterclockwise, twist the handle, after the handle is removed, the valve core will be exposed, turn off the main water valve, and replace the valve core.

1 answers2024-03-28

This is because your water pipes or main pipes are rusty, causing the shower to get rusty water as well. It is recommended that you install a water purifier at home, because bathing with a little rusty water is still a trivial matter, and drinking water containing rusty water is not good for human health!

6 answers2024-03-28

1. Check the spout.

The ordinary spout is plastic, without any elasticity, easy to block, the texture is also very poor, it is more troublesome to clean, and the better spout is generally made of high-quality silicone material, the elasticity is very good, the outlet hole will automatically expand and clean when the water is out, which is very convenient and not easy to block. >>>More

3 answers2024-03-28

Installation steps and methods of Titan bathroom shower shower: >>>More

1 answers2024-03-28

The bathroom shower socket is generally installed on the same wall as the hot and cold water outlet, and the shower should be transferred to the right 90 degrees (the direction in the picture is turned to the right) when the shower is arranged, so as not to spray directly on the human body when the water is discharged, and then transferred to the human body after adjusting the water temperature is appropriate and stable.