-
Anonymous users2024-01-23Just follow the picture to refer to the wiring.
Have fun!
-
Anonymous users2024-01-22If it turned out to be a switch, it is estimated that there is no zero line in it. It can only be a live wire, a switch wire (the live wire after the switch), so you have to change it to open five holes, unless you add another wire into it! This is a bit more difficult to do.
-
Anonymous users2024-01-21No, there is no neutral wire in the socket, one is the incoming wire of the live wire, and the other is the outgoing wire. If you want to connect to the socket, you need to have a neutral wire.
-
Anonymous users2024-01-20The landlord, as you described, at the only 2 unknown wires, if it turned out to be the control of the lights, it is definitely not a fire and zero configuration, and the power switch is set here. You need another lead to come over, at least to know whether the original control of the lamp is the fire or the neutral line, and then set up the line as needed. According to the craftsmanship of ordinary electricians, there should be a live wire or neutral line (extending all the way) in the privacy of the lamp head.
For kitchen appliances without switches (such as rice cookers, microwave ovens, etc.), the socket can be turned on (single control) and the five-pin socket can be opened. Dual control is not used, even if you buy a open (dual control) five-hole socket, you can only use it as an open (single-control) five-hole socket.
This kind of connection requires an experienced electrician, ordinary people do not move, the wrong wire will cause a short circuit and serious consequences. There are two power supplies in the three wires, one light cable, the power line is connected to the socket and the left and right contacts of the dual control, and the light wire is connected to the center head of the dual control. It is important to remember that the wiring must be carefully verified before wiring.
What was this box originally connected to? Is there a power cord and light cord in it?
You open the switch panel at the door, take a photo of the wiring, and the head of the bed is ready to change the original socket switch with five holes and take a picture (take a picture of the four wirings), otherwise it won't help you, unless you can understand the text and diagram below. >>>More
Appliances that do not have a switch (or turn off with a remote control): such as rice cookers, microwave ovens, washing machines, smart toilets, air conditioners, WiFi routers, televisions, etc.