-
Anonymous users2024-01-23This is hard to say, because the seepage will not seep out at once, that is, although you don't use water now, there will still be water under the floor, and if the water pipe is broken, then the water flow should be very large
-
Anonymous users2024-01-22Turn off the outside inlet valve at night. Turn the water pipes on the next day.
-
Anonymous users2024-01-21There is a great possibility of blocking, but it is not the kind of blockage, thinking that blockage, as long as you boil water, the water will accumulate up, so it will penetrate,
Most of the water seepage of floor tiles is caused by the rupture of the pipes under the floor tiles, and the floor tiles should be chiseled and resurfaced. >>>More
Most of the water seepage of floor tiles is caused by the rupture of the pipes under the floor tiles, and the floor tiles should be chiseled and resurfaced. >>>More
1.Turn on the fan to dry it (the surface of the board is not wet, not necessarily the inside is not wet) 2I can't blow it for a few days, and then look down. >>>More
1. You can wipe it with orange peel or grapefruit peel.
2. Alkali washing method: sodium hydroxide (caustic soda) is prepared into a 5-10% solution with hot water at a temperature of more than 80 degrees, and then scrubbed with a waste toothbrush dipped in the solution, which can be removed. >>>More
There is rust on the kitchen floor tiles, you can go to the chemical store and buy some oxalic acid to remove the rust.