What happens when the toilet sensor flushes the water without water pressure

Under normal circumstances, any flush toilet, 4-5 years of use will be fouled, the original smooth ceramic surface of the fouling, it seriously affects the drainage capacity of the toilet, resulting in the inability to flush in time, slow drainage, which is usually caused in the process of use, generally the only longer way to appear this phenomenon is to replace the toilet, even if it is descaled in various ways, the siphon elbow inside the toilet can not be completely removed, there is a temporary improvement, and this phenomenon will still appear after a while.

First of all, it is forbidden to urinate in the toilet, even if it is necessary or unavoidable, it is necessary to flush out the urine in time, do not be afraid of water, and secondly, you should not throw the paper into it after unraveling it; In addition, there is a subsection on the installation, that is, the toilet outlet must have a certain amount of water, if after flushing, the toilet outlet is always only a little bit of water left and even the outlet has not overflowed, so that the use will be directly stained on the surface of the ceramic dirt, and unhygienic and troublesome.

It should be that the flush pressure pump inside is broken, making the water come out more slowly. It is recommended that the upper tank can be replaced.

The water level adjustment device in the water tank is damaged or sinks, and the water tank does not add enough water each time, resulting in no water pressure.

Solution: The water level adjustment device (driving the float) is adjusted upward, that is, to increase the water storage capacity of the water tank, so that your original situation will not appear, if it still does not work, you can find a plumber to replace the sanitary ware of the water tank for you, and you don't need to change the toilet.