-
Anonymous users2024-01-23It doesn't matter, just put it back in place and glue it again, so don't let the toilet shake from side to side. This happened in my house, the bottom glue was opened, and then the decorator came to see it and said that it was okay, and it was just re-glued and fixed.
-
Anonymous users2024-01-22The best way is to move the toilet back to its original position and fix it with glue so that it will be safer when used in the future!
-
Anonymous users2024-01-21If your toilet has a small range of movement, the seal will not be affected. Do you see if there's a water leak down there? It's fine if there is no water leak. However, it is better to re-glue the toilet bowl again.
1. Drop 502 in the original place to melt the original 502, and then quickly wash it off with water, which is very smart! >>>More
10 yuan a piece, roadside stalls are sold, and building materials markets are also sold, about two meters, three meters long hose, stretched into the toilet, with a hand to shake out.
You can use the sewer] to dredge the spring and stir it, and nine times out of ten it will be successful. The length of the spring can be roughly measured from the ceiling of the building. >>>More
Rinse and dilute with water, then open the toilet door and release it, which can quickly remove the pungent odor. If you have a towel or other clothing, you can use it by rubbing it in clean water three times as you would if you were washing clothes. Other items can be rinsed with water.
First of all, toilet pipes and electrical pipes are two different things, so you don't have to worry about electricity. Second, the pushpin won't pierce the sewer pipe, you can flush more water and try to flush the pushpin down.