The bathroom has been renovated, how to separate dry and wet

1. If the area of the bathroom is very small, it is recommended to place the sink outside the toilet to form an independent sink; 2. If you want the bathroom to be bright and the space is large, you can use transparent materials (such as glass) as partitions, followed by a combination of half-walls and transparent materials;

3. If you want to clean and convenient, you should pay more attention to hygiene, so it is recommended to use a bath rod + shower curtain.

The dry and wet partition of the bathroom is mainly to separate the bathing space, so as to avoid the situation that the water splashes during the bath and has to be wiped after the bath. When it comes to spatial separation, there are many ways to do it. The easiest way to divide the dry and wet partition of the bathroom is to use the shower room to separate the bathing space.

Moreover, the style of the shower room is large and occupies a small space, so it is widely used. However, this method is not suitable for toilets where bathtubs are installed. For the bathroom with a bathtub, you can use a glass partition or a sliding door to separate the dry and wet space, that is, put the bathtub inside, and put the toilet and sink outside, so that the dry and wet separation can also be well achieved.

1. The most common shower rooms on the market are mainly corner and slotted. The corner shower room is relatively space-saving, and the quarter-arc shower door is suitable for installation in the corner area of the bathroom, and can also take advantage of the corner area that is not easy to handle. However, it should be noted that before installation, the various bathroom facilities in the bathroom should be arranged, and then the shower equipment and shower door should be installed at right angles.

2. If you are not willing to buy a ready-made shower room and want to achieve dry and wet separation, the most convenient way is to install a shower door. The sliding door on the market, the door frame part is aluminum alloy, and the façade is PS plastic material or higher grade tempered glass, which is rich in color and can be freely matched with the decoration style of the bathroom. Tempered glass has a high level of clarity and does not block the extension of the line of sight, and if you need to enhance privacy, you can choose sandblasted or tempered glass with a water pattern.

However, its cost is not cheap, but it is waterproof, mildew-proof, easy to take care of, high collision resistance, heat resistance, and no danger of cracking. Mulch.

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry.

2. Open separation.

Semi-open dry and wet separation refers to the use of glass or some brick walls to separate the sink, so as to achieve the effect of dry and wet separation, this separation method has achieved a clear division visually, although the dry and wet areas are still in the same space, but the two are completely independent, the effect of this scheme is very good.

3. Shower room.

Bathroom dry and wet separation shower room decoration is also a good program, shower room is a more popular way of bathroom decoration in recent years, owners can customize the size and shape of the shower room according to their own living needs and bathroom structure, the shower room can effectively prevent water vapor diffusion, is a better scheme design in the bathroom dry and wet separation.

4. Use the shower curtain for separation.

In order to reduce the budget, but also to achieve the effect of dry and wet separation, many families will choose to use the shower curtain for dry and wet separation, the installation of the shower curtain is simpler and faster, and at the same time can reduce the splashing of water droplets, and the style of the shower curtain, the style is diverse, the decorative effect is more prominent, so that the effect of the shower curtain blocking water vapor is not very obvious, if the economic conditions are better, it is not recommended to use this kind of amplification of dry and wet separation in the bathroom.

5. Use different ground materials.

The use of different floor materials for dry and wet separation is only to divide the dry and wet areas on the ground, and lay some more waterproof materials on the area where the bathroom is located, and choose materials with more comfortable feet at the washbasin, this method is usually used with the shower curtain, and the dry and wet separation is achieved visually, but the actual effect is not very good.