-
The argument of installing the floor is actually fooling you, the network cable will be wired when the plumber is doing it, and it can be slotted in the ground and threaded through the pipe. Now let's see if we can get the cable through the gap under the baseboard, or you'll have to use a router.
-
When the walls and floors can no longer be modified, there are two main ways to solve the problem of home network lines:
1. Take the bright line directly.
This practice may have some impact on aesthetics.
2. Solve home network problems with electric cats.
Directly through the router and the power modem, set up the router at the entrance end of the network cable, and then, according to the needs of the home network, buy the power modem, plug it into the socket, and configure it according to its instructions, you can solve the network needs of different spaces.
-
You can start with the house skirting and then wrap it up, which is both beautiful and convenient. If you choose a good-looking decorative strip, it can also play a decorative role.
-
Wireless card depends on the price of the machine to decide, you can only use the power cat in this case, the price is not expensive, TP power cat is OK, go to the shopping website to find out, the floor is installed and then disassembled is more troublesome, easy to bulge.
Usually, the wires for switches and lights pass through the ceiling; The wires of the socket run through the floor. If the top surface is not decorated with the ceiling, PVC trunking can be used for wiring. PVC trunking installation is manifested in 4 ways: >>>More
According to the design shape of the living room to lay the line, it is recommended that each group of lines rotten royal press a switch, so that it has been controlled and energy-saving. The wires in the ceiling are generally used in parallel, and the following controls are generally used to control the lights on one side or those controls, which should be planned when installing the wires. >>>More
Driving routes: The whole journey is about kilometres.
Starting point: Danfeng County. >>>More
Take the Hanhuang Expressway to the exit of Panlong City and go to the left.
Go under the cupboard! Then the cooktop cabinet opening is fine! If you don't understand, you can ask 1