How to deal with water seepage on the top surface of the bathroom?

Updated on Bathroom 2024-03-20
9 answers
  1. Anonymous users2024-01-23

    Waterproofing the top surface of the bathroom can't be solved.

    If the water flows to a low place, it will also seep down along the corner of the wall, so it is recommended to find a property to coordinate and let the upstairs neighbor re-waterproof.

  2. Anonymous users2024-01-22

    This is caused by water seepage on the upper floor of your house, you can go to them and ask them to do a good job of waterproofing the bathroom.

  3. Anonymous users2024-01-21

    1. If it is the reason of the upstairs residents, the upstairs needs to cooperate with it.

    2. If the water pipe is leaking, it needs to be knocked open, the water pipe repaired, and then restored.

    3. If it is not a leakage pipe, then the general situation is due to the waterproof of the bottom layer of the bathroom, and the gap between the tiles on the surface of the bathroom is seeping down, resulting in water leakage.

  4. Anonymous users2024-01-20

    There are two situations of water seepage on the top of the bathroom, 1. The bathroom is not equipped with exhaust equipment, and condensation is easy to occur in the ceiling, which can be solved as long as the exhaust is installed.

    2. Due to the lack of waterproofing of the upper bathroom floor and causing water seepage, the property should be asked to do the work of connecting the upper floor of the house, and do a good job of waterproofing to solve the problem of water seepage on the top surface.

  5. Anonymous users2024-01-19

    For this situation, the waterproofing on the top surface of the bathroom can not be solved, the water flows to a low place, and it will also seep down along the corner of the wall.

  6. Anonymous users2024-01-18

    Water seepage on the top of the bathroom should be upstairs waterproofing is not done well should be discussed with the upstairs neighbor Otherwise, let the property deal with it.

  7. Anonymous users2024-01-17

    If there is water seepage on the top surface of the bathroom, you can do a waterproofing so that there will be no water leakage.

  8. Anonymous users2024-01-16

    The top of the bathroom is smooth because the waterproofing upstairs is not done well to communicate with the upstairs.

  9. Anonymous users2024-01-15

    If there is water seepage on the top surface of the living room, it should be that the waterproofing on it is not done well, and the water is leaking, so you have to find the master to take a look.

Related questions
5 answers2024-03-20

Kitchen and bathroom ceiling materials are mainly divided into four categories, namely PVC materials, aluminum gusset materials, waterproof gypsum boards, e69da5e887aa3231313335323631343130323136353331356134 sauna board. >>>More

8 answers2024-03-20

1. First of all, knock out all the floor tiles and wall tiles about 30cm in the lower part of the wall. (Note: Knock before you knock.) >>>More

19 answers2024-03-20

Is there a bathtub, if there is a bathtub, most of them are problems under the bathtub, many people encounter this problem, and finally smash the bathtub, and then redo the ground to waterproof, and then change it to a shower partition or shower room.

9 answers2024-03-20

1. Find out the cause of water seepage on the wall, and then take the right measures to deal with it. If the water pipe is leaking, it is necessary to find the leakage point of the water pipe, and if the waterproofing is not done well and causes water seepage, then it is necessary to do a good job of waterproofing the wall. >>>More

5 answers2024-03-20

Bathroom leakage can be big or small, seeping into the home, leaking downstairs, it is a very troublesome thing, so many people are very annoyed. If it is water seepage from the ceiling of the bathroom, you don't know what kind of water it is, and it is not good to be dripped. So how to deal with water seepage in the bathroom ceiling? >>>More