How to do waterproofing if the bathroom has a little floor tiles

When brushing, you must pay attention to the joints between the ground and the wall to brush upwards when brushing, this is to take into account the amount of tiles, in fact, there is no need to worry about affecting the visual effect, because in the end the waterproof will be covered by the wall tiles, nothing can be seen, so it doesn't matter if the brush is higher, and then the ground as a whole and the wall joints should be brushed three times, so as to prevent the water from flowing downward. >>>More

1. If there is a water leakage problem in the bathroom and you don't want to smash bricks, you can choose a penetrating waterproof agent, which is similar to water. >>>More

Originally, the construction party should have a layer of polypropylene cloth to be waterproof, but now the practice is to coat both sides with a silicone brush. The key part is that the height of the wall of the shower part should be above the meter, and the other walls should be turned up by 30-50 cm, and the floor drain and sewer pipe should be closed with waterproof coating!

Bathroom waterproofing process 1: brush the waterproof paint for the first time. Before construction, it is necessary to ensure that the ground is dry, and the waterproof coating should be coated with no omission, firmly combined with the base layer, no cracks, no bubbles, and no falling off. The coating height is consistent, and the thickness should meet the requirements of the product. >>>More

To do waterproofing, you need to do ground treatment, wall treatment and other processes need to be done. >>>More