-
Surface-mounted PVC pipes are generally fixed with pipe clamps! It is best to punch holes in the pipe clamp, and tighten the lower expansion plug with self-tapping nails! If you don't use glue, choose AB glue is the fastest and best! You can also use plastic hot melt adhesives!
-
Try structural adhesives, other adhesives are not enough. Or there are also quasi-component glues.
-
To be environmentally friendly, non-toxic and high-strength, there is no such glue, and it is necessary to fix the hole and press the clip.
-
There are environmentally friendly glass glues sold in the market.
If the bathroom is leaking from the waterproofing layer, not from the upper and lower sewer pipes. They can be repaired without planing tiles. The maintenance method is very simple, which is to use a new type of penetrating waterproofing agent to waterproof the surface of the bathroom, so that the water does not enter the ground and flows directly from the waterway. >>>More
It can be waterproofed with waterproof glue.
Scope of use: 1. It is suitable for waterproof and impermeable buildings with concrete, mortar masonry structures. >>>More
After the leakage of the embedded water pipe, the saturated water in the ground and the front can not be volatilized for a while, and the leaking part of the pipeline is scrapped and installed from the new open pipe, and the water under the ground can only be volatilized for a period of time, and it will continue to have water at that time
If the tile is leaking, it is not enough to just plug the tile. You must find the source of the leak and see what is leaking, because the tile itself is not a water source, even if you change the tile, you still can't solve the problem of water leakage. Therefore, it is recommended that you remove the tiles, carefully look for the source of the leakage, and replace it if the water pipe is running out. >>>More
You get to know the technician in this area. They will take care of it for you.