-
Anonymous users2024-01-23The quota is calculated according to the horizontal projection area, and the price of the top of the falling modeling is higher, which is not good for public installation or large companies, and private individuals can.
It mainly depends on what kind of styling you do. Simple more than a hundred square meters. Complex modeling is more expensive in terms of materials and labor.
You can go to the overall design of Musihui to see the relevant living room design.
There are two kinds of this practice, one is that you can buy gypsum lines, and you can directly use quick-adhesive powder to construct on the surface of gypsum board, and the other is to use Northeast pine wood to process into a cross shape, and spray white furniture paint outside
It can be calculated by projected area or by area. If it is a linear reflective roof, it is calculated by area, and the area refers to the bottom surface plus (the size of the distance between the ceiling and the roof) and then multiplied by the total length to obtain the area of the ceiling, and the area of the ceiling is calculated, in fact, it is the area of gypsum board, such as 20 square meters is 4 5, and the calculation method is 4 (square meters.
In the case of single-layer gypsum board, fix the woodworking board (or other boards) in the grooved position in advance, and then directly leave a gap of 1 cm; If it is a double-layer gypsum board, then when the second layer is needed, the second layer of gypsum board can be installed at a distance of 1 cm where there is a gap. >>>More