What feng shui is there for the bathroom mirror front lamp

The magnitude of brightness is related to the power of this lamp, that is, the size of the W number, and you can replace the lamp with a larger power.

It should be a problem with the rectifier, and if you hear a squeaky sound, it means that the line is in poor contact, which will burn out the line or the rectifier itself. Let's take a look at the rectifier. >>>More

This kind of lamp is not expensive, it is not difficult to install, you have to find the shape you like first, as long as the shape you are satisfied with, you will buy it back and install it, and after a few years you like other good-looking ones and then replace them with new ones.

Mirror headlights have both decorative and lighting functions, because their installation position is basically higher than the height of reach, so the mirror headlamp itself is generally without a switch. The switches are mostly set in a position that is convenient to control and conforms to the overall layout.

There are many reasons for tripping I don't know how your line can go and I dare not conclude that the yellow line and the blue line of the trip are wrapped with insulating tape Connect the red line and another blue line, the bath bomb lamp you see if the red line is the live line, and then see if the zero line is the blue line, the 4 yellow lines should be 4 groups of outgoing lines are connected to the heating 2 groups of lighting 1 group ventilation 1 group First connect the bath bomb line The bath bomb line is directly connected to the plug for the zero line, remember not to make mistakes, other color lines are connected casually, the bath bomb is installed and then install the switch, the blue line depends on whether the main zero line is connected, If there is no connection, you can connect the neutral line in front of the mirror, and then touch the yellow wire with the live wire respectively to distinguish the electrical appliances controlled by each wire, and then connect to the corresponding terminal port of the switch according to the actual control line, and finally the red wire can be connected to any of the 4 wiring holes. There will be live work in the process, please take protective measures and pay attention to safety!