When the toilet hears the sound of water leakage, there is no sound when the inlet valve is closed,

Photo 1 on the left side is the water valve, now can not control the water level, even if the maintenance may not be able to close tightly, a single water valve to buy a photo, replace the new one,

It's okay to change a triangle valve, and buy a good quality all-copper triangle valve, so that it will not break down often in the future.

According to your description, I should be that the drain valve cover is not put down, if it will not be disassembled, you try to press the drain valve a few times in a row, so that he should be no problem to fall, the white lever is the top rod of the water inlet sealing valve, after the water inlet water volume will float the pontoon, the water inlet valve will stop the water inlet when the sealing environment is generated.

How to deal with leakage of toilet inlet valve.

1. Check whether the flush switch is reset. The plastic flush switch of some flush toilets has been worn for a long time, and occasionally there will be a phenomenon that it cannot be reset, if it cannot be reset, then it can be switched on and off several times, so that it can be reset. There is also to check whether the rubber gasket of the drain port under the ball valve is aging, the sealing is not tight, etc., and if the problem is found, it should be replaced, so as not to affect the use. >>>More

Does anyone know how to solve the leakage of the toilet inlet valve? Most of the leakage of the inlet valve is caused by foreign matter entering the rubber gasket that seals the water nozzle, resulting in poor sealing. You can slowly disassemble and clean it yourself, there are roughly two kinds of water inlet valves, one is buckle, and you need to find the buckle point to break it. >>>More