Is it normal for the kitchen to have a built in integrated ceiling lamp, which is higher than the al

Sometimes, in order to make the kitchen decoration more personalized and fit the life, it is usually installed in a built-in method. So how to dismantle this built-in kitchen ceiling lamp? In the process of disassembly, it will be more complicated, first cut off the power supply, carry out it in a fixed place, carefully observe the fixed points in each place, use loose tools to disassemble the fixed parts, jam the spring clips around, and break it off. >>>More

If it is an embedded integrated lamp with the same specifications as the ceiling, it can be removed with a special suction cup or straightened with a paper clip, and it can be plugged into a pry from the crack of the plate, this kind of lamp is very thin, if it is a lamp installed separately, there is a change cone to gently pry the cover plate seam, and the lampshade can be removed.

Cut off the power first. If it is an integral cassette lamp, you can directly remove the lamp by holding the lamp tray with both hands. If it is a lamp disc snap-on ceiling lamp, first use a slotted screwdriver or a knife to tell the Hui piece, insert it in the middle of the transparent cover and the white edge to the outside socks Huai answer, there will be a big crack, you can see that there are three clips on the cover, put the screwdriver in the position of the card, and then force outward, see that the card is not stuck in it, in the upward force, out of a clear card, the remaining two cards can be easily opened, and the lampshade can be pulled out by hand.

The ceiling must be installed to install, there are exposed lamp cups and wires behind the lamp, and the ceiling can be insulated and soundproofed, which is also conducive to the installation of recessed lights.

The lighting of our character is the same as the gusset, and the card triangle keel is good, and I think most of the suspended ceilings are like this.