-
Start by squaring your overall wall.
remove the squares of doors and windows) and then.
Divide the square of the monolithic wall by one brick.
of the square (some aerated bricks are 3ocmX6oCm).
It can be used, but the water flow angle is less than 135° and an inspection port or cleaning port should be set.
He smashes upstairs, and you do the renovation in your own home, and it won't affect each other. However, you can take this opportunity to urge him to do a good job of waterproofing the bathroom and implement it as soon as possible; After he completes the construction of the waterproof coating, he is required to do a 24-hour closed water test, so that you can clearly know their waterproof quality, which is good for you, so as not to have water leakage problems in the future, and then there will be trouble.
Hello, are you going to do a dry and wet partition here?
If so, it is recommended that you can set up transparent tempered glass as a partition or screen. >>>More
It is reasonable to add 9% to the loss, and in general, it is to add 5% scraps and 5% margin. The budget for laying bathroom wall tiles is generally calculated in two parts. >>>More
You can do it, my bedroom is designed by No. 1 Home Network, no problem!