After the toilet is flushed, the water tank will be filled with a lot of water to make the water lev

Updated on Toilet 2024-03-04
4 answers
  1. Anonymous users2024-01-23

    The water tank outlet cover plate is not returned in time. You can move the waterproof button and it will return to its place.

  2. Anonymous users2024-01-22

    This situation is generally due to the leakage of the water pressure rubber seal ring at the outlet of the water tank.

    One is that the rubber ring has been used for a long time, and there are chips or cracks on the edges. The other is that the rubber ring has accumulated some deposits. After the water is discharged, the water level of the tank is not high, and the water pressure is not very high, at this time, the rubber ring will continue to flow out of the gap due to the gap or the sediment is padded.

    Check the rubber ring to see if there is a thick layer of sediment, wash it off, and replace it if it doesn't.

  3. Anonymous users2024-01-21

    The water seal is high, right? Pull out the water supply pipe in the water tank and let it flow into the water tank, don't flow to the water supply port, the hose inside is thin is the water supply pipe (the new toilet is only available, the old water dispenser with a leather ball is not replenished) Then there is no way, I am repairing the toilet, the old toilet may wish to splash, there is no way, the water level can not be changed,.

  4. Anonymous users2024-01-20

    Open the lid and adjust the float downwards.

Related questions
Why does the toilet tank in the bathroom keep ringing after flushing
10 answers2024-03-04

After the water in the water tank is discharged, the water tank will be automatically refilled, and the sound you hear is automatically adding water, and it will be filled up in about 30 seconds.

After the toilet is flushed, the water is colored
3 answers2024-03-04

The supermarket sells it, and it is placed in the toilet tank to remove the smell of blue blocks.

The return speed of the toilet tank is too slow after flushing
4 answers2024-03-04

Change the inlet valve, the biggest possibility is that the inlet valve is blocked with impurities, resulting in slow water inlet. Just replace a water inlet valve, contact the store where you bought it, and it is best to change it according to the original accessories, so that the water level of the water tank is also normal.

What to do if there is a lot of water in the toilet after the toilet is flushed
1 answers2024-03-04

Open the water tank lid (ceramic lid fitted with the water button). >>>More

When the toilet flush is fully flushed, the toilet hole will not be refilled
3 answers2024-03-04

1. Flushing method: In many cases, even if the toilet is blocked, more flushing will still pass (don't be impatient to try after reading this sentence, pay attention to the back). However, if it is blocked badly, the consequences of your vigorous flushing will be more serious, and it is not good to make the water overflow, so be sure to think twice before flushing. >>>More