Why doesn t the toilet flush hard

Updated on Toilet 2024-03-12
3 answers
  1. Anonymous users2024-01-23

    It is related to the type of toilet flush, the correct installation and the amount of water on the water tank.

  2. Anonymous users2024-01-22

    You can adjust the water level of the water tank, and the specific method of the water tank manual is available.

  3. Anonymous users2024-01-21

    If it's been recently, it's only getting tougher.

    Eighty percent of the horses are blocked by foreign bodies.

    It can be soaked in Tongle and then rinsed with a large bucket.

    Or suctioning with a suction cartridge.

    Or use a wire hook to hook out the foreign body.

    If it is originally difficult to rush.

    The float rod can be bent to raise the float.

    You can have more water to flush.

    The vent refers to the drainage (fecal) pipe tee joint.

    One end is ventilated to the roof to facilitate smooth drainage.

    There are also ventilation tubes installed in septic tanks (ibid.).

    If the toilet is not clear, it is on the first floor.

    You can check whether the outlet of the septic tank (about centimeters in diameter) is blocked by the ditch full of water. Keeping the gutter clear can be improved.

Related questions
14 answers2024-03-12

1. Dredge the pipeline, and it is also necessary to expand the diameter of the pipeline; 2. If the water pressure is not enough, you can consider installing a booster pump next to the toilet;

1 answers2024-03-12

Yes, it can be adjusted inside the tank, you can open it and try it.

1 answers2024-03-12

Yes! My family will do

You can also choose whether to flush automatically or manually. >>>More

6 answers2024-03-12

The toilet flushes loudly and loudly, and most of them are caused by it.

2 answers2024-03-12

Because the water in the water tank is flushed with a single press, the second flush must wait for the water tank to be full.